PC-2025-09 - Laserfiche WebLink

P23-0480 and TR8680 Planning Commission April 23, 2025 Page 31 of 31 146. PARKING STALL DIMENSIONS: 9 feet by 19 feet standard stall (9 feet by 17 feet with 2- foot overhang over planted areas or curbs) and 8 feet by 16 feet compact stall (8 feet by 15 feet with 1-foot overhang over planted areas or curbs) shall be installed in accordance with the Project Plans. If adjacent to a sidewalk in the Project site then the adjacent sidewalk shall be 6 feet minimum. a. CORNER STALL DIMENSIONS: Stalls that are perpendicular to one another at a corner location shall provide a 2-foot buffer for each stall at the corner location as shown in the Project Plans. 147. DRIVE AISLES: 24 feet minimum shall be incorporated into the Project as shown in the Project Plans. 148. BICYCLE PARKING: The Project shall comply with the applicable bicycle parking requirements as set forth in Pleasanton Municipal Code and Objective Design Standards. Bicycle parking shall be shown on the building permit plans for review and approval by the Traffic Engineering Division prior to building permit submittal. 149. BICYCLE RACKS: All bicycle racks shall comply with the following criteria: a. Located in a visible and accessible location; b. Support the frame of the bicycle and not just one wheel; c. Allow the frame and one wheel to be locked to the rack; d. Allow the use of either a cable or U-shaped lock; e. Be securely anchored; f. Be usable by bikes with no kickstand; and g. Be usable by a wide variety of bicycle sizes and types. The number, location and type of bicycle racks shall comply with the Project Plans and shall be shown on the building permit plans and shall be subject to review and approval by the City Traffic Engineer to confirm compliance prior to issuance of building permits. [END] Docusign Envelope ID: 2B93F64A-C49E-4C2A-BF54-785F6FDA6546