ORD 1926 - Laserfiche WebLink

Fencing and Retaining Walls 13. The fence between unit C-4 and 730 Peters Avenue shall be set back a minimum of 20 feet from the front property line of unit C-4. 14. The rear yards of units C-l through C-4 shall be completely fenced. The fence plan shall be revised to address the retention of tree #88, if it is not to be relocated elsewhere on site. The applicant shall revise the plans to address this condition of approval, prior to the issuance of a building permit. Gates are allowed in the fencing, subject to the review and approval of the Planning Director. The revised fencing plan shall be clearly shown on the plans submitted for the issuance of a building permit and are subject to the review and approval of the Planning Director. 15. The top of all fencing located on top of a retaining wall shall be at the same height. The applicant shall clearly note this on the fencing plan submitted with the plans submitted for the issuance of a building permit. 16. Unless prior approval is received from the property owner of the vacant parcel to the west, no portion of the fence or retaining wall shown on Exhibit A shall be located on this shared property line. On the plans submitted for the issuance of a building permit the applicant shall clearly show whether or not the fence and retaining wall shall be located on the shared property line. 17. The retaining wall by the western property line shall be constructed of wood, concrete, or masonry block unless otherwise approved by the City Engineer. Windows 18. The building walls or the window frames shall be designed such that the windows appear to be recessed approximately at least two inches into the building wall. All window glass shall be clear with no tint. The windows shall have decorative mullions/grilles, approximately one inch wide, unless otherwise approved by the Planning Director. All windows shall have a sill. With the plans submitted for the issuance of a building permit, the applicant shall provide a detailed window section which shall be subject to the review and approval of the Planning Director. Eaves, Overhangs, and Gutters 19. All structures shall be designed such that no eaves, overhangs, or gutters shall overhang the property line. Prior to the issuance of a building permit, the applicant shall revise the plans to clearly address this condition of approval. 3