PC-91-93 - Laserfiche WebLink

4. Prior to the issuance of building permits and subject to the review and approval of the Planning Director, the landscape plan shall be revised to show the following: a. Additional landscaping in the form of hedges and fencing shall be added immediately around the tot lot, particularly on the western edge. More trees and shrubs shall be planted along the western property boundary and landscaped area of the second entrance. These shrubs may be privet, as is used elsewhere on-site, and shall be a minimum size of 5 gallons. b. Details of the gazebos, building arbors and all walls shall be indicated. c. Twenty-four-inch box trees shall be substituted for 25% of the 15 gallon Liquidambar lining the major interior street. d. The applicant shall work with staff to replace lawn with groundcover where feasible, except that area subject to foot traffic shall be lawn or hardscape. e. Details of the fencing and play equipment for the tot lots, and details of equipment in the ACTC shall be included in the final landscape plans. f. The property owner or his designee, shall maintain any and all landscaping along or within the PG&E and ACTC easements. Trees along the PG&E easement shall be regularly trimmed and pruned in an aesthetic manner to avoid interference with the overhead power lines. In no instance shall the maintenance of these trees be so neglected as to result in pruning by PG&E. 5. Prior to the issuance of building permits and subject to the review and approval of the Planning Director, the following revisions shall be included in the indicated plans: a. Monument identification signs, of a size and type similar to those proposed for the entrance medians shall be placed properly in the PSE. If the applicant feels they are necessary, smaller directional signs of a maximum height of three feet could be used in the medians of the driveways. The applicant shall work with staff to determine the appropriate location and size of both types of signs. These signs shall be included in the final sign plan, to be approved prior to issuance of building permits. b. FUlly-dimensioned and detailed floor plans for every unit type, and for the end units and fully- dimensioned and detailed plans of the semi-subterranean garages shall be included in the final building plans. All mechanical rooms, cabinets for gas, water and electric meters shall be included. c. FUlly-dimensioned details (floor plans and elevations) for the added laundry facilities shall be included in the final building plans.