Laserfiche WebLink
<br />ii. Encourage the use of building materials which create <br />a more rural character to the home and which are used <br />frequently for other homes in the area, such as wood <br />siding. (modification of MM 5r ii) <br />iii. If stucco siding is used, these building elevations <br />shall be supplemented by other materials such as wood, <br />cobblestone, slumpstone, brick or stone. <br />iv. The use of imitation wood, brick, metal, log or <br />asphalt siding is prohibited. <br />v. A color palette for brick, stone, stucco and roof <br />materials shall be included in the guidelines. A <br />sample board shall be presented to the Planning <br />Director for review and approval and kept on file for <br />review. <br />vi. Brick shall be used in limited quantities, and should <br />be used only as an accent. Natural, earth-toned, <br />unglazed bricks should be used. <br />vii. Zone 1, 2, 3 and 6 lots shall have maximum roof <br />pitches of 6:12 <br /> <br />c. Floor Area Ratio (MM 5s) <br />i. Zone 4 & 5 lots, and the lower elevation lots of Zone <br />6 (Lots, 1,4, and 8-13) shall have FAR not to exceed <br />0.25. <br />ii. Zone 2 lots shall be limited to 0.15 FAR. <br />iii. Lots 62-65 shall have FAR not to exceed 0.20. <br />iv. Calculations of floor area ratio shall include any <br />garage area in excess of 600 square feet. <br /> <br />d. All 3 or more car aaraaes shall be of the side-entry type, <br />and shall be oriented away from the street side of the lot. <br /> <br />e. Accessorv structures (MM 5t, with modifications) <br /> <br />i. Setbacks and height limits for Class I accessory <br />structures in Zone 2 and Lots 62-65 shall adhere to <br />the R-I-40,000 district standards. <br />ii. Setbacks and height limits for both Class I and Class <br />II accessory structures in Zones 4 and 5 shall adhere <br />to the R-1-20,000 district standards. <br />iii. No Class II accessory structures shall be permitted <br />outside of the building envelope areas in Lots 61-68. <br />iv. Accessory structures should be designed with materials <br />and colors similar to that of the main structure. <br />v. The design review process for accessory structures <br />shall be as noted in the Municipal Code. <br /> <br />f. Fencina (MM 5v): <br /> <br />i. Privacy fencing shall be of welded wire mesh screened <br />with landscaping and shall not exceed 72" in height. <br />Masonry block, slumpstone, etc. walls are not <br />permitted. (modification of MM 5v i) <br />