PC-95-12 - Laserfiche WebLink

Resolution No. PC-95-l2 Page 11 GENERAL PLANNING CONDITIONS 45. The location of any pad mounted transformers shall be subject to approval by the Planning Director prior to issuance of permits by the Building Department. Such transformers shall be screened by landscaping or contained within an enclosure matching the building and with corrugated metal gates. All transformers shall be shown on the plans submitted for issuance of building permits. The developer shall attempt to locate transformers at the rear of the site. 46 . All backflow prevention devices installed with the development shall be painted forest green (pantone Color System Number 2030) and shall be screened from view from publici private streets. Screens shall consist of berms, walls, or landscaping satisfactorily integrated into the landscape plan. Landscape screens shall include shrubbery designed by species and planting density to establish a complete screen within one year from the date of planting. Weather protection devices such as measures to protect pipes from freezing shall require approval by the Planning Director prior to use; at no time shall fabric or other material not designed and/ or intended for this purpose be wrapped around or otherwise placed on these devices. All backflow prevention devices shall be shown on the plans submitted for issuance of building permits together with screening mechanism and/ or weather protection devices. Proposed screening and weather protection devices shall be reviewed for conformity to these requirements and approved by the Planning Director prior to issuance of a building permit. BUILDING 47. All building and/or structural plans must comply with all codes and ordinances in effect before the Building Department will issue permits. 48. All dwelling units in the development shall be constructed to meet Title 24 state energy requirements. 49. The soils engineer shall certify the pad compactions of all lots containing fill to the satisfaction of the Director of Building Inspection prior to the issuance of building permits. 50. The developer or custom home builder shall submit plot plans for each of the residential lots showing building setbacks and a topographic plan showing grading and drainage. Pad elevations, finish floor elevations, retaining walls, easements, and maximum height of the highest structure are to be indicated on the plan. Plans for custom lots are to be signed by a registered civil engineer. All residential plot plans shall show compliance with 2907(d) and 70012(d) of the Uniform Building Code.