PC-2025-09 - Laserfiche WebLink

P23-0480 and TR8680 Planning Commission April 23, 2025 Page 6 of 31 22. LIGHTING PLAN: The applicant shall submit a lighting plan with the building permit submittal. The plan shall include photometric contours, manufacturer’s specifications on the fixtures, and mounting heights. All exterior lighting including landscape lighting shall be directed downward and designed or shielded so as to not shine onto neighboring properties or streets. The photometrics shall be reviewed and approved by the City Traffic Engineer and Director of Community Development prior to building permit issuance. The type and location of all exterior light fixtures shall be reviewed and approved by the Director of Community Development prior to building permit issuance. 23. BUILDING SURVEY: The applicant shall submit a building survey and/or record of survey prior to building permit issuance. 24. PAD AND SETBACK CERTIFICATION: The applicant shall submit a pad elevation certification prepared by a California licensed land surveyor or registered civil engineer to the Chief Building Official and Director of Community Development certifying the pad elevations and building locations (setbacks) are conforming to the Project Plans, prior to receiving a foundation inspection for the structures. 25. BUILDING HEIGHT CERTIFICATION: The applicant shall submit a building height certification prepared by a California licensed land surveyor or civil engineer to the Director of Community Development before the first framing or structural inspection by the Building and Safety Division. The height of the structures shall be surveyed and verified as being in conformance to the approved building heights as shown on Exhibit B or otherwise conditioned on the Project Plans. 26. FINAL INSPECTION: Final inspection by the Planning Division is required prior to occupancy. 27. TRANSFORMERS: New electrical transformers shall be either (a) placed underground, or (b) placed above ground and screened from view. Details of the new electrical transformers, and any screening for aboveground transformers shall be architecturally compatible with the building, shall be included in the building permit submittal, and shall be subject to the review and approval of the Director of Engineering/City Engineer and Director of Community Development prior to issuance of the relevant building permit. 28. MECHANICAL EQUIPMENT – SCREENING: The applicant shall effectively and feasibly screen from view all ducts, meters, air conditioning equipment, and any other mechanical equipment, whether on the structure, on the ground, or on the roof, with materials architecturally compatible with the relevant building. Screening details shall be shown on the plans submitted for the relevant building permit, the adequacy of which shall be determined by the Director of Community Development. All required screening shall be installed prior to final occupancy of the relevant building. 29. TRASH ENCLOSURE: All trash, refuse, and recycling shall be contained completely within enclosures. Containers shall be stored within the enclosures at all times exce pt when being unloaded. The enclosures shall be in compliance with the Project plans and shall be sized to accommodate trash, recycling, and green waste containers in compliance with applicable provisions of the Alameda County Mandatory Recycling Docusign Envelope ID: 2B93F64A-C49E-4C2A-BF54-785F6FDA6546