PC-97-23 - Laserfiche WebLink

Resolution No. PC-97-23 Page 6 EXHIBIT B-2 Conditions of Approval Case Z-96-257 Laurel Creek Production House Designs I. Development shall be substantially as shown on the development plans, Exhibit itA", dated "Received February 21,1997" on file with the Planning Department, except as modified by the following conditions. Minor changes to the plans may be allowed subject to the approval of the Planning Director iffound to be in substantial conformance to the approved exhibits. 2. This design review approval shall lapse within one (I) year from the date of approval, February 26,1997, unless a building permit has been issued and construction has commenced and is diligently pursued toward completion, or unless an extension has been approved by the City. 3. Final inspection by the Planning Department is required prior to the occupancy of the houses. All lot fencing, final lot grading, and any proposed lot landscaping shall be completed prior to inspection. 4. In the event that any additional accessory structures, tennis courts, decks or building additions are proposed to be constructed on the lots covered by this application, the property-owner shall submit an application for review and approval by the Zoning Administrator in accordance with Municipal Code requirements for design review (Pleasanton Municipal Code Section 18.20). 5. All private landscaping and irrigation shall be installed by the homeowner within nine months of occupancy. Proiect Specific Conditions 6. Prior to the issuance of building permits, the developer shall submit a model release plan indicating the number of each model and elevation to be used for the entire release with a tally of the total models and elevations constructed for each previous release. 7. Prior to the issuance of building permits, the developer shall submit a lotting plan for each phase of construction which shows the model type on each lot, which indicates which lots are to be constructed with second units, and a plot plan for each lot indicating all setbacks for all structures, the lot size, and the FAR (including the second unit) for each lot, and the minimum/average building separation between principal structures.