My WebLink
|
Help
|
About
|
Sign Out
16
City of Pleasanton
>
CITY CLERK
>
AGENDA PACKETS
>
2023
>
081523 SPECIAL
>
16
Metadata
Thumbnails
Annotations
Entry Properties
Last modified
8/9/2023 2:47:36 PM
Creation date
8/9/2023 2:47:12 PM
Metadata
Fields
Template:
CITY CLERK
CITY CLERK - TYPE
AGENDA REPORT
DOCUMENT DATE
8/15/2023
DESTRUCT DATE
15Y
There are no annotations on this page.
Document management portal powered by Laserfiche WebLink 9 © 1998-2015
Laserfiche.
All rights reserved.
/
62
PDF
Print
Pages to print
Enter page numbers and/or page ranges separated by commas. For example, 1,3,5-12.
After downloading, print the document using a PDF reader (e.g. Adobe Reader).
View images
View plain text
Turnout 4 Replacement and Booster Station <br /> Turnout 4 is located at the southwest corner of the intersection of Stoneridge Drive and <br /> Hopyard Road (see Figure 2 below) and was built in 1980 with a capacity of 4,500 <br /> gallons per minute (gpm). The City connects to Zone 7's 30-inch supply line in Santa <br /> Rita Road with a 12-inch line designed for 4,500 gpm capacity. The control and <br /> metering equipment are housed below grade in a concrete vault with a small building to <br /> house the fluoride chemicals and control systems. The site is shared with a "Welcome <br /> to Pleasanton" sign, electrical cabinet and traffic signal equipment. <br /> W <br /> yy <br /> Ar <br /> �- <br /> .t <br /> lob <br /> ,,.,.o, . <br /> Figure 2 - Existing Turnout 4 <br /> The turnout operates with higher pressure from Zone 7, pushing water into the City's <br /> distribution system. As the Tri-Valley area grew, the available pressure from Zone 7's <br /> system decreased when other agencies filled their systems, thus reducing the turnout's <br /> capacity to below 1,000 gpm during peak demand. A water booster station is required to <br /> ensure the demand can be met regardless of other agencies' activity. The booster <br /> station will use electric pumps to pull water from Zone 7's system and increase the <br /> pressure to the City's system-desired water-pressure setting, and will be designed to <br /> meet the future peak demand of 5,200 gpm. If future peak demands exceed the existing <br /> 12-inch piping capacity of the existing turnout (control valve and metering), the piping <br /> will be upsized to 16 inches to feed the new booster station. <br /> The existing site has minimal space. Staff and the consultant recommended purchasing <br /> a prefabricated booster station (built off-site) that can be placed using a crane, thereby <br /> limiting the site work to the below-grade piping. During construction, the existing turnout, <br /> fluoride system, traffic signal controller and temporary booster pump will remain in <br /> operation. The existing tree will need to be removed due to the extensive root damage <br /> from the installation of the new piping and equipment pad. The new booster station will <br /> be placed between the sound wall and the existing welcome sign in the current <br /> landscaped area. Additional equipment will be placed adjacent to the existing fluoride <br /> building with new fencing, and plantings will be used to screen the equipment. The <br /> welcome signage is anticipated to be mounted to the face of the new building. The <br /> booster station is anticipated to be similar to the Recycled Water Booster Station in the <br /> Ken Mercer Sports Park (see Figure 3). <br /> Page 5 of 10 <br />
The URL can be used to link to this page
Your browser does not support the video tag.