Laserfiche WebLink
2.5.27.1. Height of steps shall be consistent with the overall staircase run for <br /> smooth patron entry/egress. All steps (including the interior step well) <br /> shall be of equal height(+/- 1/4"),with the exception of the first(auxiliary) <br /> step, as measured from ground level. <br /> 2.5.27.2. Steps shall be finished with a non-skid surface and a safety yellow, non- <br /> skid front strip. <br /> 2.5.27.3. Steps shall include an audible/visual indicator system to warn the driver <br /> that the step is extended when the ignition key is activated. <br /> 2.5.27.4. Steps shall be controlled at the driver's area. <br /> 2.5.28.High-output 40,000 BTU heater/defroster with dash-mounted automotive type <br /> heater controls. <br /> 2.5.29.Rear back-up alarm, 1 12db, installed behind rear axle. <br /> 2.5.30.Driver and passenger seats shall be high back, deluxe type seats with adjustments <br /> for fore/aft, height and recline. <br /> 2.5.30.1. Driver and passenger seats shall swivel, but only lock in the forward "driving" <br /> position (no lock toward desk position). <br /> 2.5.30.2. Seats shall include FMVSS approved and installed, three-point seat belt <br /> systems. Driver's side shall include an easily detachable shoulder strap to <br /> allow ease of rotation. <br /> 2.5.30.3. Seats shall meet FMVSS302 flammability standards. <br /> 2.5.30.4. Seats shall be positioned and installed to allow drivers varying in size from <br /> 5'0" tall weighing 951bs. to 6'4" tall weighing 250Ibs. to be equally <br /> comfortable in using all controls required to safely operate and maneuver <br /> the vehicle. <br /> 2.5.31.Added components shall be finished with DuPont Imron 5000 or equivalent paint <br /> to match OEM paint color. <br /> 2.5.31.1. Panels shall be properly cleaned and prepared for paint application in <br /> accordance with standard commercial practice and to requirements of the <br /> construction materials involved. Surfaces shall be properly cleaned and <br /> inspected before cover materials are applied. <br /> 2.5.31.2. The prepared surfaces shall be spray primed with synthetic base primer, <br /> which contains corrosion resistant pigments and resins. Extra coats shall be <br /> applied around moisture catching moldings, etc. All hidden areas such as <br /> overlapping metal, underside of moldings, underside or rubber extrusions at <br /> windows shall be cleaned and primed and where necessary and caulked with <br /> sealing compound during construction. <br /> 2.5.31.3. Two(2)or three(3)evenly applied coats of DuPont Imron 5000 or equivalent <br /> paint, two (2) for dark colors and three (3) for light colors, shall be applied <br /> to all areas of the metal. Each coat shall be properly dried and evenly sanded <br /> City of Pleasanton Outreach Vehicle Specifications(Version 1.1) Page 9 of 23 <br />