12 - Laserfiche WebLink

2.5.23.Cab headlining and insulation. 2.5.24.Aluminum extruded load space floor planks. 2.5.25.One(1)44"x 80" "sedan type"wheelchair access door with no step well,positioned per drawings. 2.5.25.1. Door interior shall be finished with magnetic dry erase board. 2.5.25.2. Door shall have deep tinted safety glass upper horizontal sliding window with screen and deep tinted safety lower fixed-pane window. 2.5.25.3. Door shall utilize recess mounted continuous stainless steel hinge. 2.5.25.4. Door shall utilize standard latch mechanism with interior and exterior handles. 2.5.25.5. One (1) Yale 112 series or equivalent heavy-duty latch bolt shall be installed in addition to the exit devices: keyed alike to the other doors. 2.5.25.6. Door shall include a hold-back device appropriate for this application. Hold-back device shall be installed to securely position the open door at approximately 160°. 2.5.26.One(1)32"x 80"passenger side"sedan type" mid entry(patron)door with lowered step well; placed per drawings. 2.5.26.1. Door interior shall be finished to complement interior. 2.5.26.2. Door shall have deep tinted safety glass upper horizontal sliding window with screen and deep tinted safety lower fixed-pane window. 2.5.26.3. Door shall utilize recess mounted continuous stainless-steel hinge. 2.5.26.4. One (1) Yale 2100 series or equivalent flat bar exit device shall be installed. Device shall be listed by Underwriters Laboratory(UL)for safety as panic hardware and meet Federal Specification FF-H-1820 and ANSI A156.3, grade 1. 2.5.26.5. One (1) Yale 112 series or equivalent heavy-duty latch bolt shall be installed in addition to the exit devices: keyed alike to the other doors. 2.5.26.6. One (1) Yale or equivalent, commercial-duty door closer with hold-open feature shall be installed. 2.5.26.7. Door shall include a secondary heavy-duty cast aluminum hold-back device appropriate for this application. Hold-back device shall be installed to securely position the open door at approximately 90°. 2.5.26.8. Step well shall be a two-step configuration with minimum 11"deep treads and maximum 9" risers. Each step shall incorporate heavy-duty, slip resistant commercial rubber step tread reinforced with aluminum back. The front edge of each tread shall incorporate a 2" safety yellow edge. 2.5.27.One (1) electric-operated auxiliary step or equivalent shall be installed at the side doorway. City of Pleasanton Outreach Vehicle Specifications(Version 1.1) Page 8 of 23