12 - Laserfiche WebLink

NOVEMBER 2021 | 5 requirements; the meeting discussion will be summarized in meeting minutes. Carollo will provide two to three conceptual drawings and renderings for City review. Siegfried will develop the landscaping design for Well 9 (consistent with Amador Community Park) and provide visual screening for new facilities at the CTF. This task includes attending a pre-design coordination meeting to discuss landscaping requirements, assisting in the development of renderings, and developing 50 percent, 95 percent, 100 percent, and bid landscape design drawings and specifications. Task 2.7.b – Building Department Permit Application The Building Department permit review application will be submitted at 95 percent design for the new Well 9 building, new Well 8 electrical building, CTF structure, and electrical service upgrades at all three well facilities. Carollo will provide technical support for the permit and incorporate building department review comments. Task 2.7.c – Chemical Facility Design Coordination with Livermore-Pleasanton Fire Department Carollo will attend two meetings with the Livermore-Pleasanton Fire Department at the 50 percent and 95 percent design submittals to review the OSC chemical facility design. Carollo will incorporate the Fire Department’s review comments into the design. Task 2.7.d – Municipal Regional Stormwater Permit Carollo will prepare the Municipal Regional Stormwater Permit (MRP) C.3 and C.6 required packages for City engineering department review and incorporate requirements into the final design. Carollo will also assist in preparing maintenance plans. Task 2.7.e – Constructability Review Coordination The City will hire a third-party consultant to perform a constructability review of the 95 percent design. Carollo will provide technical information, attend the constructability recommendations workshop led by the third-party consultant, and incorporate comments into final design. Task 2.8 – Hydraulic Surge Analysis Carollo will perform a hydraulic surge analysis of project facilities during final design. The analysis will consider each well site, the PFAS treatment system, and impacts to the City’s existing potable distribution system. The surge analysis will consider the surge developed by power failure at each well pump, pump start, valve closures, and PFAS treatment system operation that may cause a hydraulic transient surge condition. The surge analysis will be summarized in a technical memorandum (TM) and will provide recommendations for operation of the system, surge control facilities at each well site, opening/closing speed for the pump control valve, and surge control facilities within the City’s distribution system (if necessary). Task 2.9 – Corrosion Protection Evaluation and Design JDH Corrosion (JDH) will lead the corrosion protection evaluation and final design task. The corrosion protection evaluation and design scope of work is defined in Attachment A. Task 2 Deliverables: · Draft and final surge analysis TM.