2_Exhibits A & C - Laserfiche WebLink

4. GROWTH MANAGEMENT PROGRAM: The project shall meet all requirements of the City's Growth Management Program, as determined by the Director of Community Development; or Growth Management Agreement, if applicable. 5. APPEAL PERIOD: The building permit submittal will only be accepted after completion of the appeal period provided in the Municipal Code unless the applicant submits a signed statement acknowledging the plan check fees may be forfeited in the event the approval is overturned on appeal, or the design is significantly changed as a result of the appeal. In no case will a building permit be issued prior to the expiration of the appeal period. 6. LIABILITY AND INDEMNIFICATION: To the extent permitted by law, the project applicant shall hold harmless, defend (with counsel acceptable to the City), and indemnify the City, its City Council, its officers, commissions, employee and agents from and against any claim, action, or proceeding brought by a third party against the indemnified parties and/or the applicant to attack, set aside, or void the approval of the project or any permit authorized hereby for the project, including without limitation, reimbursing the City its attorneys' fees and costs incurred in defense of the litigation. The City may, in its sole discretion, elect to defend any such action with attorneys of its choice. PLANNING DIVISION —925-931-5600 Site Development and Building Design 7. BUILDING MATERIALS AND COLORS: The building materials and colors shall be stated on the building permit plans. 8. GARAGE DOORS: The building permit submittal shall include all design and manufacturer specifications for the roll-up garage doors. The roll-up garage doors shall be architecturally compatible with the proposed residence and shall be subject to review and approval by the Planning Division prior to issuance of building permits. (Project Specific Condition) 9. WINDOWS: All windows shall be divided light design. If simulated muntins are used, they shall be located on both sides of the glass. All windows shall be recessed from the exterior building wall. Manufacturer type, design, material, window recess and installation details for all windows within the project shall be specified in conformance with the Approved Plans in the building permit submittal. Any proposed modifications shall be subject to review and approval by the Planning Division prior to issuance of building permits. (Project Specific Condition) 10. FENCE/WALL: All fencing and walls shall be shown on the construction plans with the building permit submittal. The design and location must be approved by the Planning Division and comply with all requirements. 11. LIGHTING PLAN: The applicant shall submit a lighting plan with the building permit submittal. The plan shall include photometric contours, manufacturer's specifications on the fixtures, and mounting heights. All exterior lighting including landscape lighting shall be directed downward and designed or shielded so as to not shine onto neighboring properties or streets. No landscaping up-lighting shall be permitted. The type and location of all exterior light fixtures shall be reviewed and approved by the Director of Community Development prior to building permit issuance. (Project Specific Condition) 12. MECHANICAL EQUIPMENT: All HVAC condensing units shall be shown on the plans. (Project Specific Condition) P19-0390 Planning Commission Page 2 of 11