PC-99-71 - Laserfiche WebLink

14. The project developer shall reduce the width of the 900 degree driveway aisle lo- cated near the project site's southeast comer in order to increase the landscape area located between the driveway and the sidewalk. The width of the driveway shall be the minimum distance needed to accommodate two-way traffic. This change shall be shown on the final site, engineering, and landscape plans submit- ted for review and approval by the Planning Director before issuance of a building permit. Building and Site Design Requirements: IS. The project developer shall post address numerals on the building so as to be plainly visible from all adjoining streets or driveways during both daylight and night time hours. Tenant spaces shall be identified as determined by the City. 16. The project developer shall effectively screen from view all ducts, meters, air con- ditioning equipment, and any other mechanical equipment, whether on the struc- ture, on the ground, or on the roof, with materials architecturally compatible with the main structure. Screening details shall be shown on the plans submitted for is- suance of building permits, the adequacy of which shall be determined by the Planning Director. All required screening shall be provided prior to occupancy. 17. All mechanical equipment shall be constructed in such a manner that noise ema- nating from it will not be perceptible beyond the property plane of the subject property in a normal environment for that zoning district. 18. All trash and refuse shall be contained completely within enclosures architecturally compatible with the main structure. The materials and color of the enclosure walls shall match the building walls and the gates shall be corrugated metal or solid wood. The location and design of the enclosures shall be shown on the plans sub- mitted for issuance of building permits. Trash containers shall be stored within the enclosure at all times, except when being unloaded. 19. The location of any pad mounted transformers shall be subject to approval by the Planning Director prior to issuance of permits by the Building Department. Such transformers shall be screened by landscaping or contained within an enclosure matching the building and with corrugated metal gates. All transformers shall be shown on the plans submitted for issuance of building permits. The project devel- oper shall attempt to locate transformers at the rear of the site. Final Conditions of Approval per Planning Commission Z-99-228, Commercial Service Building October J 4, J 999 Page 3 of J J