PC-2019-10 - Laserfiche WebLink

7. FITNESS BUILDING: Prior to issuance of building permits, the following changes shall be made to the proposed fitness building: a. Window placement and sizes shall be modified to create a more consistent window pattern. Window glazing patterns shall be simplified and made more uniform in pattern. b. The proposed entry feature shall include a cap element and detailing similar to the submitted renderings on sheet A-3.02. c. The horizontal window pop-out along the third floor of the south elevation shall be removed. d. The vertical, protruding building element on the south elevation should be reduced in scale, or modified in design to be less prominent. The element may be removed altogether if replaced with an appropriate alternative design element that adds articulation to this facade. (PROJECT SPECIFIC CONDITION) 8. APPLICANT DESIGN GUIDELINES: Any changes to the exterior of the buildings shall receive landlord approval prior to submitting to the City for building permit plan check and shall generally adhere to the guidelines included in the Landlord Architectural Guidelines, Exhibit F, prepared by Simon Properties, dated "Received" on April 17, 2019, and kept on file in the Planning Division of the Community Development Department. (PROJECT SPECIFIC CONDITION) 9. RETAINING WALL MATERIAL AND COLOR: Plans submitted for plan check shall include the proposed retaining wall heights, materials and color. Unless otherwise approved by the Director of Community Development, all retaining walls visible from the street shall be stucco or decorative in design. (PROJECT SPECIFIC CONDITION) 10. SHOPPING CART CORRALS: Plans submitted for plan check shall include the design of any proposed shopping cart storage corrals on-site and shall be subject to the review and approval by the Director of Community Development. The storage corrals/screening shall be designed to include complementary materials and colors consistent with the design of the center. (PROJECT SPECIFIC CONDITION) 11. SETBACKS: All buildings and building elements, excluding building projections as defined by Section 1884.120 of the Pleasanton Municipal Code, shall be set back a minimum of 12-feet from the back of the public sidewalk as shown on the Stoneridge Mall Road street Section A on the Preliminary Grading Plan within Exhibit B. (PROJECT SPECIFIC CONDITION) 12. PARKING: All future uses associated with this approval shall demonstrate that then-existing uses at the Stoneridge Mall, plus the new use proposed shall meet the minimum Pleasanton Municipal Code requirements for parking. (PROJECT SPECIFIC CONDITION) 13. CLIMATE ACTION PLAN: The project shall provide the Climate Action Plan (CAP) Measures identified in the CAP Checklist within Exhibit B, in accordance with the City's approved Climate Action Plan. 14. WINDOWS: Manufacturer type, design, material, and installation details for all windows within the project shall be specified for each unit/building in in the building permit submittal. Any proposed modifications shall be subject to review and approval by the Planning Division prior to issuance of building permits. 15. PAVING MATERIALS: The color, material, design, and product specifications for the paving materials used on-site shall be in substantial conformance with the Approved Plans and included with the building permit submittal. Any proposed modifications to the final paving P18-0340 Planning Commission Page 3 of 20 e work and work was performed in accordance with the arborist's recommendations. (PROJECT SPECIFIC CONDITION) P18-0109 Planning Commission Page 12 of 13 or the rented units. (PROJECT SPECIFIC CONDITION) P18-0109 Planning Commission Page 4 of 13