04 - Laserfiche WebLink

City of Pleasanton DRAFT Recycled Water Infrastructure Expansion Phase 1A Design of Additional Improvements o Designing equipment and enclosure foundation and anchorage and submitting calculations for these items stamped by a licensed structural engineer;City will be responsible for review of these calculations o Complying with applicable codes in design of the package system o The manufacturer will be the Responsible Engineer for the packaged system design, including professional stamping and signature. • Pump station manufacturer will provide control strategy and P&ID for the packaged system. • The City will coordinate power service requirements with PG&E, based on power requirements provided by the equipment manufacturers. • No significant design changes will be directed by the City after completion of the 75%design effort. • Drawings and specifications for booster pump station and required site modifications will be supplement the contract documents for the Phase 1A project. • Supplemental specifications for commodity items(conduit,wire, meter panel, miscellaneous instruments)will be incorporated on the drawings • Development of Title 24 compliance forms is not included. • Power is available along Parkside Drive. Project will include a conduit run from power pole to booster station site and will utilize existing spare conduit installed with Phase 1A pipeline. • Booster station site is at the south end of the Arroyo Mocho pipeline crossing,south of the paved parking lot and on existing turf grass. • Booster station will visually screened within a fence(PVC coated chain link with green PVC slats) with gate access. • All packaged equipment will be in manufacturer-provided weather-proof enclosures within the fenced site perimeter. • 3 phase power at proper voltage for pumping equipment is available from a local transformer vault or service box along Parkside Drive. • It is assumed the surge control requirements can be incorporated into the packaged pump system (manufacturer responsibility)and not require additional design by RMC • City will submit power service application to PGE and pay the required fees to initiate PG&E engineering work. • Standby power for pumping is not required • Provisions will be included for plugging in a portable generator • City will provide control panel and programming, radio or other telemetry to SCADA and all wiring and incidental materials and work for an operable booster pump station • RMC design will land field instrument cables to a common terminal strip to be used by City's panel manufacturer for landing signals to the panel • City will provide panel dimensions and weights. It is assumed that the panel can be incorporated in to the package manufacturer's skid in the field,without design of separate support. • Survey of site not required. City GIS mapping and Phase 1A mapping will be used for site development design • Scope does not include landscaping or irrigation system improvements • Scope does not include construction phase support,which would be defined under an additional amendment. Scope of Work 4