05 - Laserfiche WebLink

21. All exterior lighting including landscape lighting shall be directed downward and designed or shielded so as to not shine onto neighboring properties. The project/building developer shall submit a final lighting plan including photometrics and drawings and/or manufacturer's specification sheets showing the size and types of light fixtures. The lighting plan shall be subject to the review and approval by the Director of Community Development prior to issuance of building permits for the project. 22. The recorded deed of sale for all lots covered by this PUD Development Plan approval shall include separately recorded disclosure statements or restrictive covenants indicating the following: a. That the property is in an area subject to noise, activity, and traffic impacts associated with a Downtown location. b. The adjacency of the Union Pacific Railroad and possible noise, including noise from train whistles and horns, and vibration impacts from said railroad. c. That additions to the homes for all lots are prohibited. d. That boats, trailers, campers, motor homes, and other recreational vehicles are prohibited from being parked or stored on-site. e. That the garages shall not be modified or used for storage in a manner that would interfere with the ability to park two cars within the garage and that each resident shall utilize the garages for the parking of vehicles. Wording for these disclosures and covenants shall be written in simple/plain language, shall be submitted to the City Attorney for review and approval before recordation of the parcel map for the development, and shall be recorded over the project site by separate instrument. 23. The project developer shall provide all initial home buyers with copies of the project conditions of approval and the site development standards for accessory structures. 24. Wood-, fiberglass-, or vinyl-framed/sashed windows shall be utilized on all windows. If fiberglass- or vinyl-framed/sashed windows are used, they shall have a similar frame and sash thickness as found on a traditional wood-framed/sashed window unless the required noise mitigation for this project prevents compliance with this requirement. In addition, window mullions shall be raised and located on both sides of the glass unless the required noise mitigation for this project prevents compliance with this requirement. Manufacturer's specification sheets, details, and sections of the windows, and window treatments (sills, trim, etc.) shall be shown on the building permit plans and shall be subject to review and approval by the Director of Community Development prior to issuance of a building permit. P14-0124, P14-0125, and PUD-107/377 St. Mary Street Planning Commission 7 of 26