01 - Laserfiche WebLink

EXHIBIT A system. 3.02 CERTIFICATION OF THE BASE INSTALLATION A. THE BASE AND DRAINAGE, The Contractor is responsible for the review and acceptance of the base and drainage. B. Upon completion of the base, this contractor will submit in written form the acceptance of the base noting any deficiencies. 3.03 DELIVERY AND INSPECTION OF MATERIALS A. Prior to the installation of any materials and immediately upon delivery of the synthetic turf system and components to the project site, the Contractor shall inspect materials as follows: 1. For damaged or defective items 2. Measure turf pile height and roll lengths 3. Inspect the perforations and uniformity 4. Adhesives shall arrive in sealed dry containers. 5. Rubber in-fill shall arrive in large sacks or bags without tears and loose material about. 6. Rubber in-fill shall arrive dry and loose. No Rubber shall be accepted that is bulked or solid. 3.04 CITY OF PLEASANTON TESTING A. The City of Pleasanton reserves the right to submit any material, either before or after installation to any testing it deems necessary to satisfy the conditions of this contract. B. Any material tested and found not in compliance with the contract will be rejected and replaced with material conforming to the specifications. This will be done at the sole expense of the contractor. C. Any testing performed by the City of Pleasanton will be at the City of Pleasanton's expense. The contractor is responsible for the cost of all testing the fails. 3.05 TURF INSTALLATION A. After acceptance of the base materials, any turf material with less than the 20 oz. secondary backing shall have a the 6 oz. non-woven geotextile membrane is installed under each area of the panel, the synthetic turf is staged and unrolled as necessary for a daily installation. No material will be allowed to be unrolled 24