07 - Laserfiche WebLink

2.3 Spare Equipment The Contractor shall maintain adequate storage and shop repair facilities to perform the requirements of this Agreement, including a sufficient stock of spare parts, standby controllers and signal equipment to complete permanent repairs to the system within a thirty(30) day period. Failure to complete permanent repairs within this time limit may be sufficient cause for the City to authorize repairs to be completed by others. Repetitive failure shall be sufficient cause for the City to terminate this Agreement. The Contractor shall be responsible for furnishing all spare standby controllers necessary to maintain the continued safe, efficient operation of the signal system when the original unit is withdrawn for maintenance, repair or modification. Standby controllers shall be fully compatible with the City's traffic control system without exception. All component parts (detectors, load switches, phones, lights,signal monitors,etc.)of each system shall be maintained at all times to perform the functions for which they were designed unless authorized to the contrary by the City Traffic Engineering Division. 2.4 Vehicle Signals All new installed lamps SHALL BE LED and meet the most current Caltrans Standard Specifications and City of Pleasanton Specifications for vehicle signal faces and signal heads.The Contractor shall replace or repair vehicle signals as they malfunction. All labor resulting from replacing burned out, flickering, dim or otherwise non-functioning vehicle signal indications shall be replaced as part of the preventative maintenance flat rate. 2.5 New Traffic Signal Installations Contractor shall maintain any additional traffic signals and appurtenant devices as they are installed, or become a part of the maintenance requirements of the City. Refer to Section 8 of this document for Compensation. Prior to the turn-on of a new traffic signal or a traffic signal modification, Contractor shall perform an inspection of the traffic signal, monitor the flashing-out of the new signal heads, and review the new traffic control equipment operation prior to full activation of the new traffic signal system. Compensation will be per Section 8 of this document as Extra Work. 2.6 Pedestrian Signals All new installed pedestrian signals SHALL BE LED and meet the most current Caltrans Standard Specifications and the City of Pleasanton Specifications for pedestrian signals.The Contractor shall replace or repair pedestrian signals as they malfunction. All labor costs resulting from replacing burned out, flickering, dim or otherwise non-functioning pedestrian signal indications shall be replaced as part of the preventative maintenance flat rate. Traffic Signal Maintenance Contract Contract No. Attachment 3—Scope of Work Page 4