PC 2001-08 - Laserfiche WebLink

Resolution No. PC-2001-08 Page 7 16. 17. 18. 19. 20. 21. The project developer shall submit a waste generation disposal and diversion plan to the Building Department prior to issuance of building or demolition permits. The plan shall include the estimated composition and quantities of waste to be generated and how the project developer shall recycle at least fifty percent (50 percent) of the job site construction and demolition waste. Proof of compliance shall be provided to the Director of Building Inspection prior to the issuance of a final building permit. During demolition and construction, the project developer shall mark all trash disposal bins "trash materials only" and all recycling bins "recycling materials only". The project developer shall contact Pleasanton Garbage Service for all waste disposal. Only that portion of trash and recycling waste refused by Pleasanton Garbage Service shall be disposed of or diverted by another trash/recycling company. The applicant shall submit a final lighting plan for the building for the review and approval of the Planning Director prior to issuance of building permits. Lighting shall be directed away from adjacent properties and, if deemed necessary by the Planning Director, shall incorporate cut-off shield type fixtures to prevent glare onto adjacent properties or roadways. All trash and refuse shall be contained completely within enclosures architecturally compatible with the main structure. The materials and color of the enclosure walls shall match the building walls and the gates shall be corrugated metal or solid wood. The location and design of the enclosures shall be shown on the plans submitted for issuance of building permits and shall be subject to the approval of the Planning Director and Fire Chief. Trash containers shall be stored within the enclosure at all times, except when being unloaded. All utilities required to serve the proposed development shall be installed underground, unless otherwise determined by the City Engineer. The location of any new pad mounted transformers shall be subject to approval by the Planning Director prior to issuance of permits by the Building Department. Such transformers shall be screened by landscaping or contained within an enclosure matching the building and with corrugated metal gates. All transformers shall be shown on the plans submitted for issuance of building permits. A final landscape plan and irrigation plan shall be submitted to and approved by Planning Director as part of the building permit plan set prior to issuance of an on-site permit. Said landscape plan shall be consistent with the approved landscape plan plus any conditions of approval, and shall be detailed in terms of species, location, size, quantities, and spacing.