RES 83539 - Laserfiche WebLink

Exhibit "A" 32. 34. 35. 36. That the developer submit a site development plan in accordance with the Survey Ordinance (Article 3, Chapter 3, Title II) and that these plans be approved by the City Engineer prior to the issuance of a building permit. That the site development plan include all required information to design and construct site, grading, paving and drainage. Specific items to be indicated on the site development plan necessary to construct storm, sewer and water systems are: Type of pipes to be used (storm, sewer, water); Length of pipes in linear feet (storm, sewer, water); Slopes of pipes (storm and sewer); Invert elevations at each inlet or junction structure (storm and sewer); Horizontal control necessary to set relationships between buildings, parking, curb and gutter (storm, sewer and water); Show top of pipe and bottom of pipe elevations where any pipes cross under or over one another; Differentiate between public and private systems. Landscape areas, parking stalls, driveway aisles, buildings, curbs and gutters shall have horizontal control dimensioning indicated on site development plan. That the paving sections for the parking and drive areas shall be designed on the basis of an R-Value test and a Traffic Index to carry the anticipated~traffic load. This design shall be subject to the approval of the City Engineer. The minimum paving section shall be 2" A.C. on 6" A.B. The minimum A.C. pavement slope shall be 1%. That the developer's contractor obtain an encroachment permit from the City prior to the beginning of con- struction. That the developer pay any and all fees that the property may be subject to. That the haul route for all materials to and from this development be approved by the City Engineer prior to the start of any construction~