ORD 1987 - Laserfiche WebLink

Ordinance No. 1987 91. The design for the line, grade, and structural sections for the streets serving this development shall be subject to final review and approval by the City Engineer. 92. The project developer shall submit a refundable cash bond for hazard and erosion control prior to issuance of an Engineering or Building and Safety Division permit. The amount of this bond will be determined by the City Engineer. 93. The project developer/subdivider shall deposit a bond with the City of Pleasanton to ensure completion of any required improvements (installation of all common open space and recreational improvements, private streets, street trees, common infrastructure improvements, etc.). The project developer shall provide an itemized cost estimate of said improvements, to be submitted with the bond, for the review and approval the City Engineer prior to issuance of building permits. The bond shall be returned to the project developer upon acceptance of said improvements by the City Engineer. This bond shall be in a standard form approved by the City Attorney. 94. The applicant shall post with the City prior to approval of final map, an additional performance bond for all subdivision improvements that are not to be accepted by the City of Pleasanton. 95. The project developer shall grant an easement to the City over those parcels needed for public service easements (P.S.E.) and which are approved by the City Engineer or other easements, which may be designated by the City Engineer. 96. The project developer's contractor(s) shall obtain an encroachment permit from the City Engineer prior to moving any construction equipment onto the site. 97. The haul route for construction materials and equipment transported to/from this development via large trucks (three tons and greater) shall be restricted to come from the east (via Stanley Boulevard and/or Busch Road) and not through the Santa Rita Road/Valley Avenue intersection unless a specific exemption is granted by the City Engineer. The City Engineer shall approve said haul route prior to the issuance of an encroachment permit. 98. The project developer shall include erosion control measures on the final grading plan, subject to the approval of the City Engineer. The project developer is responsible for ensuring that the contractor is aware of such measures. All cut and fill slopes shall be revegetated and stabilized as soon as possible after completion of grading, in no case later than October 15. No grading shall occur between October 15 and April 15 unless approved erosion control measures are in place, subject to the approval of the Building and Safety Division. Such measures shall be maintained until such time as permanent landscaping is in place.