Laserfiche WebLink
7. Blue reflective markers shall be installed on the finished <br />streets as required to indicate fire hydrant locations. <br />8. The design and installation of the drainage swales and <br />drainage benches shall provide for access for maintenance <br />purposes. <br />9. Concrete V-ditch "spillways" shall be installed when required <br />between upper and lower drainage benches. <br />10. Prior to the City Council approval of the final map for this <br />development, the applicant shall provide the following items <br />to the City for Fire Department base mapping purposes: <br />a. Two mylar copies each of a 1"=100' scale map and a <br />1"=250' scale map of the development showing only the <br />following map elements: <br />(1) Street right-of-way lines <br />(2) Property (or lot) lines <br />(3) Face of curb lines <br />b. One mylar copy each of a 1"=100' scale map and a 1"=250' <br />scale map of the development showing the following: <br />(1) Street names and street addresses in addition to <br />the elements listed in item a. The street names <br />and addresses shall be readable at the 250 scale <br />(1/8" min. height letters at 250 scale). <br />(2) Fire hydrants <br />(3) Building envelope(s), driveways, and sidewalks for <br />large or non-standard lots. <br />c. The mylars submitted shall contain the following, where <br />applicable: <br />(1) Project name(s) <br />(2) Project number(s) <br />(3) North arrow <br />(4) Graphic scale <br />(5) A written scale showing the actual scale of the <br />reduced mylar copy <br />(6) Name, address, and telephone number of the firm and <br />the name of the individual contact that provided <br />the mylar copy <br />11. The applicant shall select a tract name prior to submittal of <br />the final map and improvement plans. <br />(csr5808) <br />