PC-88- 01 - Laserfiche WebLink

process containers mechanically provided that the entire process is enclosed within the machine. In order to accept and temporarily store all three container types in a proportion commensurate with their relative redemption rates, and to meet the requirements of certification as a recycling facility, multiple grouping of reverse vending machines may be necessary. A bulk reverse vending machine is a reverse vending machine that is larger than 50 square feet, is designed to accept more than one container at a time, and will pay by weight instead of by container. D. "Mobile Recycling Unit" means an automobile, truck, trailer or van, licensed by the Department of Motor Vehicles, which is used for the collection of recyclable materials. A mobile recycling unit also means the bins, boxes or containers transported by trucks, vans or trailers, and used for the collection of recyclable materials. 9.22.030 Permits Required. No person shall permit the placement, construction, or operation of any recycling facility without first obtaining a permit pursuant to the provisions set forth in this Section. Recycling facilities may be permitted as set forth in Table 9.22.030. In addition, recycling facilities may also be allowed in planned unit developments (PUD's) which allow uses that are conditionally permitted in the commercial or industrial zoning districts listed in Table 9.22.030, and provided that the applicable permits are obtained pursuant to the requirements set forth in Table 9.22.030. 9.22.040 Permit Approval Process. A. Large collection and processing facilities may be allowed in the zoning districts shown in Table 9.22.030 upon the granting of a conditional use permit pursuant to the requirements of Chapter 18.124 (Conditional Uses). B. Reverse vending machines and small collection facilities may be allowed in the zoning districts shown in Table 9.22.030 upon the granting of an administrative conditional use permit by the zoning administrator. 1. Application to install a reverse vending machine(s) or a small collection facility shall be made with the zoning administrator, including any fee established heretofore, and shall include a site plan, elevations, and such other information as established in Section 9.22.060 (Criteria and Design Standards) and determined as necessary by the zoning administrator to enable the application to be reviewed. 2. The zoning administrator will review the application for conformance with Section 9.22.060 (Criteria and Design Standards) and may approve, conditionally approve, or deny the application. No application shall be approved, as applied for or conditioned, unless the zoning administrator finds that: - 4 -