PC 2006-54 - Laserfiche WebLink

13. The height of the structures shall be surveyed and verified as being in conformance to the approved building height as shown on Exhibit A or as otherwise conditioned. Said verification is the project developer's responsibility, shall be performed by a licensed land surveyor or civil engineer, and shall be completed and provided to the Planning Department before the first framing or structural inspection by the Building and Safety Division. 14. The applicants shall submit a pad elevation certification prepared by a licensed land surveyor or registered civil engineer to the Chief Building Official and Planning Director, certifying that the pad elevations and building locations (setbacks) are pursuant to the approved plans, prior to receiving a foundation inspection for the structure. 15. This development shall be considered as a "first-come, first-served" project for growth management purposes. 16. Wood-burning fireplaces shall be prohibited. Natural gas-fired fireplaces, EPA-certified wood fireplaces or heaters, and wood pellet-fueled heaters and fireplace inserts shall be allowed. 17. The project developer shall provide all buyers with copies of the project conditions of approval. 18. Details and sections of the siding installation, door trim, and window treatments (sill, trim, frame, sash, mullion, window recess, etc.) shall be shown on the building permit plans and shall be subject to review and approval by the Planning Director prior to issuance of a building permit. 19. The project developer shall submit a final exterior lighting plan for the project for the review and approval of the Planning Director prior to issuance of building permits. All exterior lighting shall be directed downward and designed or shielded so as to not shine on neighboring properties. The applicant shall submit a final lighting plan, and include drawings and/or manufacture's specification sheets showing the size and types light fixtures proposed for the exterior of the buildings and parking areas. The light fixtures and their locations shall be subject to the review and approval of the Planning Director. 20. All conditions of approval shall be attached to all building permit plan check sets submitted for review and approval. These conditions of approval shall be attached at all times to any grading and construction plans kept on the project site. It is the responsibility of the applicant/property owner to ensure that the project contractor is aware of, and abides by, all conditions of approval It is the responsibility of the applicant/property owner to ensure that the project landscape contractor is aware of, and adheres to, the approved landscape and irrigation plans, and all conditions of approval. Prior approval from the Planning Department is required before any changes are constituted in site design, grading, house design, house colors or materials, fence material, fence location, landscape material, etc. 3