RES 89191 - Laserfiche WebLink

Page 2 April 4, 1989 Job No. 1426.300 3. On a part-time basis, observe and perform subgrade preparation density tests on the prepared subgrade in pavement areas. 4. On a part-time basis, observe the placement and perform density tests on the aggregate base rock in pavement areas. 5. As requested, perform slump tests and prepare concrete cylinders for laboratory compression testing. 6. As needed, perform laboratorytests on representative samples of the backfill, import materials and concrete to support the field operations. Results of our observations and tests will be made available to the City Inspector on the site so that timely, corrective action might be taken as necessary. Upon completion, we will summarize our observations and test results in a report. FEE AGREEMENT We will provide our services on a time-and-expense basis in accordance with the attached Fee Schedule - 1989, which is made a part of this agreement by reference. However, the rate for Senior Engineering Technician (including vehicle, nuclear gauge and concrete testing equipment) will be $64.00 per hour. It is not possible for us to accurately estimate the amount of time necessary to complete this project. Many factors during construction are beyond our control; i.e., contractor's actual rate of progress and weather. If a six month construction period were assumed, our costs could be roughly budgeted as follows: Typical project costs not directly related to schedule: 1. Consultation Prior to and during construction $ 3,000 - 8,000 operations 2. Laboratory Testing 3,000 - 5,000 3. Post-Construction Report, with field and 1.000 - 2,000 laboratory data Total $7,000 - $15,000 BERLOGAR GEOTECHNICAL CONSULTANTS