RES 07127 - Laserfiche WebLink

c. An area shall be provided near the electrical panel for the "inverter" required to convert the direct current output from the photovoltaic panels to alternating current. These measures shall be shown on the building permit plan set submitted to the Planning Director for review and approval before issuance of the first building permit. 36. The project developer shall post address numerals on the buildings covered by this approval so as to be plainly visible from all adjoining streets or driveways during both daylight and night time hours. Tenant spaces shall be identified as determined by the City. 37. The project developer shall effectively screen from view all ducts, meters, air conditioning equipment, and any other mechanical equipment, whether on the structure, on the ground, or on the roof, with materials architecturally compatible with the main structure. Screening details shall be shown on the plans submitted for issuance of building permits, the adequacy of which shall be determined by the Planning Director. All required screening shall be provided prior to occupancy. 38. All mechanical equipment shall be constructed in such a manner that noise emanating from it will not be perceptible beyond the property plane of the subject property in a normal environment for that zoning district. 39. All trash and refuse shall be contained completely within enclosures architecturally compatible with the main structure. The materials, colors, and detailing of the enclosure walls shall match the approved building designs and the gates shall be corrugated metal or solid wood. The location and design of the enclosures shall conform to the locations shown on the approved site plans and shall be shown on the plans submitted for building permits and shall be subject to the approval of the Planning Director and Fire Chief. Trash containers shall be stored within the enclosure at all times, except when being unloaded. 40. The location of any pad-mounted transformers shall be subject to approval by the Planning Director prior to issuance of permits by the Building and Safety Division. Such transformers shall be screened by landscaping or contained within an enclosure matching the building and with corrugated metal gates. All transformers shall be shown on the plans submitted for issuance of building permits. The project developer shall attempt to locate transformers at the rear - east project boundary - of the site. 41. All parking spaces shall be striped. 42. The approved building materials and colors shall be stated on the plans submitted for issuance of building permits. Page 10 of 21