16 ATTACHMENTS - Laserfiche WebLink

Standard Requirement Principal and Class I and ll Accessory Structure Setbacks Minimum Front Yard Setback 30 feet Minimum Side Yard Setback 15 feet Minimum Rear Yard Setback 30 feet Maximum Principal Structure Height 30 feet Maximum Accessory Structure Height 15 feet Retaining Walls 5 feet max. height parallel walls may be used with 3 feet of landscaping between walls publicly visible retaining walls shall be faced with a brown or ra stone Solid Privacy Fencing permitted only on areas of the site where the following three conditions are met: (1) the grade is 10% or less, (2) the fence meets the setbacks of the principal structure, and (3) the fence is not located over the driveway, including the rass strips, leading to Lot 1 Open Fencing, permitted per the R-1-20,000 District Not Including Chain Link standards where the following three conditions are met: (1) the fencing is not located on the driveway, including the grass strips, leading to Lot 1, (2) on Lot 3, the fence is setback a minimum of 10 feet from the front property line, and (3) the fence is white, black, brown, or dark reen. Note 1: See Exhibit A for all yard designations. Lots 1 and 2 are flag lots. List of Site Development Restrictions: a. Lots 1 and 2 i. No modifications shall be allowed to the "y" hammerhead on Lot 1 or to the driveway leading to Lot 1, including the two foot wide grass strips adjacent to the driveway, unless otherwise approved by the Fire Marshal and the Planning Director. The "y" hammerhead and driveway are needed for emergency ingress and egress. ii. Agate shall not be allowed over the driveway leading to Lot 1. iii. The driveway leading to Lot 1 shall be a color and material which blends in with the hillside, subject to the approval of the Planning Director.