SR 06:287 - Laserfiche WebLink

the project developer submits a signed statement acknowledging that the plan check fees may be forfeited in the event that the approval is overturned on appeal, or that the design is significantly changed as a result ofthe appeal. In no case will a building permit be is- sued prior to the expiration of the IS-day time-period. Planning Requirements: 12. All conditions of approval for this approval shall be written by the project developer on all building permit plan check sets submitted for review and approval. These conditions of approval shall be on, at all times, all construction plans kept on the project site. It is the responsibility of the building developer to ensure that the project contractor is aware of, and abides by, all conditions of approval. Prior approval from the Planning Depart- ment must be received before any changes are constituted in site design, building design, etc. 13. The project developer shall submit a waste management plan to the Building and Safety Division prior to issuance of building or demolition permits. The plan shall include the estimated composition and quantities of waste to be generated and how the project devel- oper intends to recycle at least SO% of the total job site construction and demolition waste measured by weight or volume. Proof of compliance shall be provided to the Chief of Building and Safety prior to the issuance of a final building permit. During demolition and construction, the project developer shall mark all trash disposal bins "trash materials only" and all recycling bins "recycling materials only". The project developer shall con- tact Pleasanton Garbage Service for the disposal of all waste from the site. 14. The project developer shall prepare and record a metes and bounds description delineat- ing the building envelope areas, including the entire event center and winery area covered by this application and the envelope area for the existing residence and three existing ac- cessory buildings shown on the site plan. The metes and bounds description shall be pre- pared to the satisfaction of the City Engineer, shall be reviewed by representatives ofthe Tri- Valley Conservancy before its recordation, and shall then be recorded before occu- pancy of the buildings covered by this approval. In order to clearly demarcate these areas in the field, the project developer shall place brass property corners/hubs in conformance to the metes and bounds description before occupancy of the buildings covered by this approval. IS. The applicant shall submit sign details to the Planning Director for review and approval before installation. 16. All HV AC condensing units and related equipment shall be located at the intersection of the existing storage structures on the northerly side of the wine production building as SR06: 287 Page 15