SR 05:259 - Laserfiche WebLink

Elevation renderings can be in black and white or color and should include shadowing and texturing that accurately illustrates how the home will look (minimum of front elevation required; on comer lots both street facing elevations are required). 6. Preliminary color and material selections to include a laheled Color and Materials Board: (a) Maximum size 8-1/2" x 14"; (b) Labeled as follows at a minimum: "Homesile owner last name, lot and tract number. date of suhmittal . manufacturer(s) name of color and lor material(s), manufacturer style number(.\). " Final Design Review Submittal 1. Site Plan (118"~1 '-0") (a) Indicate Sewer/Water Tie-In Locations (b) Indicate Floor Area, FAR, Lot Coverage, Site Area; (c) All other site plan information, see Preliminary Design Review Submittal 2. Grading and Drainage Plan (a) Existing and finish grades; (b) Site drainage 3. Floor Plans (a) Note door and window sizes and operations (b) Fully dimensioned floor plans; (c) Area of each floor; (d) All other floor plan information, see Preliminary Design Review Submittal. 4. Elevations (a) Articulate with detail bubbles all typical architectural details. (b) Specify or detail the size, height and color or all precast exterior materials including foam trim. (c) Specify stucco finishes and all exterior colors, finishes and materials (d) Indicate maximum height (e) Indicate architectural style on each elevation sheet. (f) All other elevation information see Prcliminary Design Review Section. 5. Roof Plan (a) Note plate heights and down spout locations; (b) All other elevation information see Preliminary Design Review Submittal 6. Building Sections (a) Indicate floor to floor heights, plate heights and relevant architectural details; 3