PC-2004-29 - Laserfiche WebLink

17. Two parking spaces shall be maintained in the Lot A garage at all times and one parking space shall be maintained in the Lot B garage at all times. The Lot A and B garages shall not be used for storage in a manner that would interfere with the ability to park cars within the garage. This restriction shall be disclosed to the future homeowners in a manner satisfactory to the City Attorney. IS. No boats, campers, or trailers shall be parked or stored on Lot B. Boats, campers, or trailers shall not be stored or parked in the Lot A garage or uncovered parking space, but may be parked or stored in other locations on the site provided that they are adequately screened from the street as required in Chapter IS.S4 of the Municipal Code. 19. The height of the structures shall be surveyed and verified as being in conformance to the approved building height as shown on Exhibit "A" or as otherwise conditioned. Said verification is the project developer's responsibility, shall be performed by a licensed land surveyor or civil engineer, and shall be completed and provided to the Planning Department before the first framing or structural inspection by the Building Department. 20. The applicants shall submit a pad elevation certification prepared by a licensed land surveyor or registered civil engineer to the Chief Building Official and Planning Director, certifying that the pad elevations and building locations (setbacks) are pursuant to the approved plans, prior to receiving a foundation inspection for the structure. 21. This development shall be considered as a "first-come, first-served" project for growth management purposes. 22. Wood-burning fireplaces shall be prohibited. Natural gas-fired fireplaces, EP A-certified wood fireplaces or heaters, and wood pellet-fueled heaters and fireplace inserts shall be allowed. 23. The project developer shall provide all buyers with copies of the project conditions of approval. 24. Details and sections of the siding installation, door trim, and window treatments (sill, trim, frame, sash, mullion, muntin, window recess, etc.) shall be shown on the building permit plans and shall be subject to review and approval by the Planning Director prior to issuance of a building permit. 25. The windows shall have a similar frame and sash thickness as found on a traditional wood-framed/sashed window. 26. The applicants shall use high quality ("architectural grade") composition roof shingles on both units that is thicker than standard composition shingles. A roof material sample or manufacturer's brochure shall be included with the plans submitted for issuance of building permits and shall be subject to the review and approval by the Planning Director prior to issuance of building permits for the project.