PC-96-79 - Laserfiche WebLink

Resolution No. PC-96-79 Page 10 58. The applicant shall sweep or vacuum the parking lot and sidewalks a minimum of once a month and shall prevent the accumulation of litter and debris on the site. Corners and hard to reach areas shall be swept manually. If sidewalks and/or the parking lot are pressure washed, debris must be trapped and collected to prevent entry into the storm drain system. No cleaning agent may be discharged into the storm drain. If any cleaning agent or degreaser is used, wash water must be collected and discharged to the sanitary sewer, subject to approval of the Dublin-San Ramon Services District (DSRSD). 59. The restaurant shall include a contained area for cleaning mats, containers, and equipment. The wash area shall be covered or shall be designed to prevent runoff onto or from the area. The area shall be connected to the sanitary sewer, subject to approval by DSRSD, or shall be collected in a containment area and removed regularly by a disposal and recycling service. If connected to the sanitary sewer, a structural control such as a sand filter or oil/ water separator shall be used, and a sign shall be posted prohibiting the dumping of hazardous materials. Other methods may be used subject to the approval of the Director of Building Inspection. The applicant shall instruct employees to conduct all washing activities in this area. 60. The applicant shall label all on-site storm drain inlets with the wording, "No Dumping -- Drains to Bay" using City-approved methods and materials. On-site storm drain facilities shall be cleaned a minimum of twice a year as follows: immediately prior to October 15 and once in January. Additional cleaning may be required iffound necessary by the City Engineer/Director of Building Inspection. 61. The applicant shall include erosion control/storm water quality measures on the final grading plan which shall specifically address measures to prevent soil, dirt, and debris from entering the storm drain system. Such measures may include, but are not limited to, hydroseeding, hay bales, sandbags, and siltation fences and are subject to the review and approval of the City Engineer/Director of Building Inspection. Ifno grading plan is required, necessary erosion control/storm water quality measures shall be shown on the site plan submitted for an on-site permit, subject to the review and approval of the Director of Building Inspection. The applicant is responsible for ensuring that the contractor is aware of and implements such measures. 62. All metal roofs shall be finished with rust-inhibitive paint. 63. The applicant shall submit a construction Best Management Practices (BMP's) program for review and approval by the Planning Director prior to issuance of building and/or grading permits. These BMP's shall be implemented by the general contractor and all subcontractors and suppliers of materials and equipment. Construction site cleanup and control of construction debris shall also be addressed. Failure to comply with the approved construction BMP may result in the issuance of correction notices, citations, or a stop work order.