PC-96-28 - Laserfiche WebLink

Resolution No. PC-96-28 Page 11 b. The trash enclosure area( s) shall be completely covered. An area drain shall be installed in the enclosure area which connects to the sanitary sewer. A structural control such as an oil/water separator or sand filter shall be provided. No other area shall drain into the trash enclosure; a berm shall be installed to prevent such drainage if found necessary by the City Engineer/Director of Building Inspection. A sign shall be posted prohibiting the dumping of hazardous materials into the sanitary sewer. The applicant shall notify the Dublin-San Ramon Services District (DSRSD) upon installation of the sanitary connection; a copy of this notification shall be provided to the Planning Department. c. The property owner shall sweep or vacuum the parking lot and sidewalks a minimum of once a month and shall prevent the accumulation of litter and debris on the site. Corners and hard to reach areas shall be swept manually. If sidewalks and/or the parking lot are pressure washed, debris must be trapped and collected to prevent entry into the storm drain system. No cleaning agent may be discharged into the storm drain. If any cleaning agent or degreaser is used, wash water must be collected and discharged to the sanitary sewer, subject to approval of the Dublin-San Ramon Services District (DSRSD). d. The developer shall label all on-site storm drain inlets with the wording, "No Dumping -- Drains to Bay" using City-approved methods and materials. On-site storm drain facilities shall be cleaned a minimum of twice a year as follows: immediately prior to October 15 and once in January. Additional cleaning may be required if found necessary by the City Engineer/Director of Building Inspection. e. The developer shall include erosion control/storm water quality measures on the final grading plan which shall specifically address measures to prevent soil, dirt, and debris from entering the storm drain system. Such measures may include, but are not limited to, hydro seeding, hay bales, sandbags, and siltation fences and are subject to the review and approval of the City Engineer/Director of Building Inspection. If no grading plan is required, necessary erosion control/storm water quality measures shall be shown on the site plan submitted for an on-site permit, subject to the review and approval of the Director of Building Inspection. The applicant is responsible for ensuring that the contractor is aware of and implements such measures. f. The developer shall submit a construction Best Management Practices (BMP's) program for review and approval by the Planning Director prior to issuance of building and/or grading permits. These BMP's shall be implemented by the general contractor and all subcontractors and suppliers of materials and equipment. Construction site cleanup and control of construction debris shall also be addressed. Failure to comply with the approved construction BMP may result in the issuance of correction notices, citations, or a stop work order.