5_Exhibit C - Laserfiche WebLink

Page 3 6. BUILDING MATERIALS AND COLORS: The building materials and colors in the Approved Plans shall be stated on the building permit plans. 7. PAVING MATERIALS: The color, material, design, and product specifications for the paving materials used on-site shall be in conformance with the Approved Plans and included with the building permit submittal. Any proposed modifications to the final paving design details shall be subject to review for conformance to the Objective Design Standards. 8. WINDOWS: Manufacturer type, design, material, and installation details for all windows within the project shall be specified for each unit/building in conformance with the Approved Plans in the building permit submittal. Any proposed modifications shall be subject to review for conformance to the Objective Design Standards by the Planning Division prior to issuance of building permits. 9. FENCE/WALL: All fencing and walls shall be shown on the construction plans with the building permit submittal in conformance with the Approved Plans. Any proposed modifications shall be subject to review for conformance to the Objective Design Standards by the Planning Division prior to issuance of building permits. 10. LIGHTING PLAN: The applicant shall submit a lighting plan with the building permit submittal in conformance with the Approved Plan. The plan shall include photometric contours, manufacturer’s specifications on the fixtures, and mounting heights. Any proposed modifications shall be subject to review for conformance to the Objective Design Standards by the Planning Division prior to issuance of building permits. 11. PAD AND SETBACK CERTIFICATION: The applicant shall submit a pad elevation certification prepared by a California licensed land surveyor or registered civil engineer to the Chief Building Official and Director of Community Development certifying the pad elevations and building locations (setbacks) are conforming to the approved plans, prior to receiving a foundation inspection for the structures. 12. BUILDING HEIGHT CERTIFICATION: The applicant shall submit a building height certification prepared by a California licensed land surveyor or civil engineer to the Director of Community Development before the first framing or structural inspection by the Building and Safety Division. The height of the structures shall be surveyed and verified as being in conformance to the approved building heights as shown on Exhibit B or as otherwise conditioned. 13. FINAL INSPECTION: Final inspection of each building by the Planning Division is required prior to that building’s occupancy. 14. TRANSFORMERS: New electrical transformers shall be placed underground, or aboveground and screened from view to the satisfaction of the Director of Community Development. Details of the new electrical transformers, and any screening architecturally compatible with the building, shall be included in the building permit submittal and shall be subject to the review and approval of the Director of Engineering/City Engineer and Director of Community Development prior to building permit issuance. 15. MECHANICAL EQUIPMENT – SCREENING: The applicant shall effectively screen from view all ducts, meters, air conditioning equipment, and any other mechanical equipment, whether on the structure, on the ground, or on the roof, with materials architecturally compatible with the building in conformance with the Approved Plan and Objective Design Standards. Screening