Laserfiche WebLink
0889721 Tow Eyes, w/Hitch Receiver, 2G <br />Pumper <br />REAR TOW EYES <br />Two (2) tow eyes, which are an integral part of the body mounting substructure, will be installed <br />below the rear of the truck. <br />The tow eyes will be of adequate strength to allow the truck to be pulled from the eyes. <br />REAR HITCH RECEIVER <br />One (1) hitch receiver will be installed below the tailboard at the rear of the apparatus. <br />The hitch will be constructed of high strength steel and reinforced to the truck framework, via the <br />rear body substructure. The hitch receiver will have an SAE J684 Class IV rating of 10,000 lb <br />towing and 1000 lb tongue weight. <br />Slide-in portion will be held in place by one (1) safety pin with clip. <br />The trailer electrical connection will be a no electric connection. <br />0590934 Hose Restraint, Running Board, <br />Straps, FV Fastener <br /> <br />RUNNING BOARD HOSE RESTRAINT <br />A pair of 2.00" wide black nylon straps with seat belt buckle fasteners will be provided for each <br />hose tray to secure the hose during travel. There will be Two (2) hose trays located one (1) in <br />each side running board. <br />0695614 Tray, Hose, Running Board, Free <br />Floating, Special Capacity, Tapered <br />Both Corners <br />HOSE TRAY <br />Two (2) hose trays will be made free floating one (1) in each side running board. <br />The tray(s) will be flanged and drop in from the top. The ends will be tapered at the front and rear <br />towards the center. No fasteners will be used to secure the tray(s). <br />Capacity of the tray will be 25' of 5.00" LDH. <br />Rubber matting will be installed on the floor of the tray to provide proper ventilation. Drain holes <br />will be provided. <br />37717Bid #: