Laserfiche WebLink
0625331 Transmission, Shifter, 6-Spd, Push <br />Button, 4000 EVS <br />TRANSMISSION SHIFTER <br />A six (6)-speed push button shift module will be mounted to right of driver on console. Shift <br />position indicator will be indirectly lit for after dark operation. <br />The transmission ratio will be: <br />1st <br />3.51 to 1.00 <br />2nd <br />1.91 to 1.00 <br />3rd <br />1.43 to 1.00 <br />4th <br />1.00 to 1.00 <br />5th <br />0.75 to 1.00 <br />6th <br />0.64 to 1.00 <br />R <br />4.80 to 1.00 <br />0684459 Transmission Oil Cooler, Modine, <br />External <br />TRANSMISSION COOLER <br />A Modine plate and fin transmission oil cooler will be provided using engine coolant to control the  <br />transmission oil temperature. <br />0801876 Fluid, 4000 Series Trans, Allison <br />Approved TES-668 Synthetic, IPOS, <br />Custom <br />TRANSMISSION FLUID <br />The transmission will be provided with TranSynd, or other Allison approved TES-668 heavy duty <br />synthetic transmission fluid. <br />0001375 Driveline, Spicer 1810 DRIVELINE <br />Drivelines will be a heavy-duty metal tube and be equipped with Spicer® 1810 universal joints. <br />The shafts will be dynamically balanced before installation. <br />A splined slip joint will be provided in each driveshaft where the driveline design requires it. The <br />slip joint will be coated with Glidecoat® or equivalent. <br />0734211 Steering, Sheppard M110 w/Tilt, <br />TAK-4, Paccar Pump, w/Cooler, <br />Paccar <br />STEERING <br />Dual Sheppard, Model M110, steering gears, with integral heavy-duty power steering, will be <br />provided. For reduced system temperatures, the power steering will incorporate an air to oil <br />cooler and Paccar hydraulic pump with integral pressure and flow control. All power steering lines <br />will have wire braded lines with crimped fittings. <br />A tilt and telescopic steering column will be provided to improve fit for a broader range of driver <br />configurations. <br />0802950 Steering Wheel, 4 Spoke w/Wiper <br />Control, Saber FR/Enforcer <br /> <br />STEERING WHEEL <br />The steering wheel will be 18.00" in diameter, have tilting and telescoping capabilities, and a four <br />(4)-spoke design. <br />There will be a switch pod provided on the left side of the steering wheel between the spokes. <br />The switch pods will be an integral part of the steering wheel. The following switches will be <br />provided: <br />Windshield wash <br />Wiper intermittent speed increase <br />Wiper intermittent speed decrease <br />Hi/Lo wiper speed <br />Wiper off <br />0550144 Logo/Emblem, on Horn Button <br /> <br />LOGO AND CUSTOMER DESIGNATION ON HORN BUTTON <br />The steering wheel will have an emblem containing the Pierce logo and customer name. The <br />emblem will have three (3) rows of text for the customer's department name. There will be a <br />maximum of eight (8) characters in the first row, 11 characters in the second row and 11 <br />characters in the third row. <br />The first row of text will be: LPFD <br />The second row of text will be: none <br />The third row of text will be: none <br />0624298 Bumper, 16" Extended, Saber <br />FR/Enforcer <br />BUMPER <br />A one (1) piece, ten (10) gauge, 304-2B type polished stainless steel bumper, minimum of 10.00" <br />high, will be attached to a bolted modular extension frame constructed of 50,000 psi tensile steel <br />"C" channel mounted directly behind it to provide adequate support strength. <br />The bumper will be extended 16.00" from front face of cab. <br />Gravel Pan <br />A gravel pan, constructed of bright aluminum treadplate, will be furnished between the bumper <br />and cab face. The gravel pan will be properly supported from the underside to prevent flexing and <br />vibration of the aluminum treadplate. <br />11717Bid #: