Laserfiche WebLink
Objective Design Standards for Housing Sites <br />City of Pleasanton - Appendix Page 1 - Adopted January 26, 2023 <br /> <br /> <br /> <br /> <br />APPENDIX A <br />MULTIFAMILY BUILDING TYPES <br /> <br />Introduction <br />Property owners and developers of multifamily projects are encouraged to “mix and match” among the <br />following Building Types in order to achieve the required minimum average density, and to provide the <br />varied building character desired by the City. It is anticipated that more than one building type will be <br />built on large parcels, depending on the location, street frontage, mix of uses, and desired parking ratios. <br />It is left to the applicant where and how to combine the Building Types listed below. <br />While some of the prototypes described in the following pages are typically built at density ranges which <br />may exceed the densities allowed on the designated Housing Element Sites, such prototypes can be <br />mixed with lower density building types on the site to achieve an average site density consistent with the <br />maximum densities allowed in Table 2.1. <br /> <br />The following multifamily building types and their average densities are listed in this document for <br />reference only: <br />A1. Attached Rowhouse/Townhouses (14-25 du/ac) <br />A2. Garden Style with Surface parking (20-25 du/ac) <br />A3. Tuck Under Podium (25-40 du/ac) <br />A4. Townhouses/Flats with Podium Parking (40-60 du/ac) <br />A5. Residential Wrap Building with Parking Structure (40-70 du/ac) <br />A6. Residential Buildings with Off-Site Parking District (50-80 du/ac) <br />A7. Mixed-Use Buildings <br />A8. Retail Buildings (Stand Alone) <br />A9. Live/Work <br /> <br /> <br /> <br /> <br /> <br /> <br /> <br /> <br /> <br /> <br /> <br /> <br /> <br /> <br /> <br /> <br /> <br /> <br /> <br /> <br /> <br /> <br />