10 - Laserfiche WebLink

3.08 Graffiti Graffiti shall be removed from the site within one week of notification by the City. The areas in which graffiti removal is required includes sound walls, controller boxes, valve boxes and any other surface in the maintenance areas. The cost of graffiti removal shall be paid for as "Extra Work". SECTION 4. NON-IRRIGATED TURF 4.01 General The Contractor shall maintain all non-irrigated turf areas by performing the following operations and other work incidental thereto: 4.02 Mowing Upright grasses/weeds shall be mowed to a uniform height not-to-exceed 4 inches in warm weather and 4 inches during the rainy season. Mower blades shall be kept sharp so as not to damage the turf. Cut all large turf areas using a rotary riding mower. For those areas with slopes 3 to 1 or steeper, use specialty mowers specifically designed for steep slope areas. Push mowers shall only be used in those areas where a ride mower cannot be used. Provide a list of the mowers you intend to use on the project to the Project Administrator for approval at the pre-job conference. 4.03 Edging Turf shall be edged along borders, walls, curbs, fences, paths, rocks, gravestones, etc., for neat appearance where needed. Clippings shall be removed from planting beds and walks. Edges shall be trimmed weekly during the growing season. Clippings shall be vacuumed or blown off walks back into turf areas. Clippings shall not be blown into the streets nor allowed to collect in drainage ways. Clippings shall be caught and removed from the site. Contractor shall be responsible for any damage caused by his operations. Nylon line or other whip edger's shall not be used to edge ground cover areas or within two feet of any trees or shrubs. Contractor is responsible for any damage caused by this equipment. 4.04 Weed Control Non-irrigated turf areas shall be carefully spot-treated with selective herbicides to control broadleaf weeds and weed grasses as weather and turf conditions dictate 12