Laserfiche WebLink
Objective Design Standards for Housing Sites <br />City of Pleasanton - 34 - DRAFT: December 14, 2022 <br /> <br /> <br /> <br /> <br />Single Family Tract Development <br />Single Family Homes and Primary Structures of Multiple Single Family Development on the same parcel <br />shall comply with the following massing standards: <br />B1.3 Elevations fronting Public Streets, Internal Streets, Paseos, Open Spaces, or the City of <br />Pleasanton Trail System shall limit any continuous plane to 40% of the total façade length <br />through the use of recesses or projections not less than three feet in depth from the adjacent wall. <br />B1.4 Garages shall comply with the following standards <br />a. Garages shall not be oriented to face Paseos or the city public Trail System <br />b. Garages facing Public Streets and Internal Streets shall be limited to 30% of the total <br />width of the home façade, or 22 feet interior clear width, whichever is greater. <br />B1.5 Residential floor area above the ground floor shall be limited to 40% of the ground floor area. <br />a. Floor area located under sloping roofs shall be counted in accordance with the ANSI <br />Z765 standard: <br />i. Residential floor area above the ground floor must have a minimum <br />clearance of 5 feet above the finished floor <br />ii. 50% of the floor area above the ground floor must have ceilings at least 7 <br />feet above the finished floor. <br /> <br /> <br /> <br /> <br />