12 - Laserfiche WebLink

3.2.13.5. Desks shall include a lift-up connecting surface/bridge to span the distance between the two (2)desks. 3.2.13.5.1.Bridge shall utilize heavy-duty hardware and include a latch to secure the bridge from swinging when not in use. 3.2.13.5.2.Finished knee hole area of the desks, including pencil drawer, shall be a minimum 26"from the floor to allow adequate knee space. 3.2.13.6. Both desks shall include a 3-drawer storage cabinet with latching drawers. 3.2.13.7. Both desks shall be finished with Wilsonart HPL or equivalent antimicrobial laminate. Final color/pattern shall be chosen by the city from manufacture's standard selections. 3.2.14.Two (2) wheel box seats shall be furnished over the wheel wells as depicted in the preliminary drawing. Seats shall be designed and constructed with storage beneath in available areas. 3.2.14.1. Seats shall be finished with carpet selected by the city from manufacturer's selections. 3.2.15.Two (2) overhead storage cabinets shall be provided above the staff desks as depicted in the concept drawings. Cabinets shall include lockable bulletin board type doors per final design, keyed alike to the other interior locks. 3.2.15.1. Cabinets shall have a lower, open shelf for placement of printers and other peripherals. This shelf shall contain a cable grommet for easy technology connection. 3.2.16.An Acore Shelving &Products, Inc. aluminum shelving system shall be supplied and installed. Shelving components shall be powder coated after assembly where possible using coatings containing no lead or lead products. All components shall be constructed from superior grade lightweight materials and be built to withstand the unique stresses imposed by a mobile environment. The shelving layout shall be designed to accommodate approximately 3,500 items, which includes but is not limited to: books of various sizes, DVDs, CDs, videos, books on CD, oversized materials of odd shapes, magazines, etc. All shelving running along the sidewalls of the vehicle shall tilt back 15 degrees. The completed modular shelving system shall include the following components: 3.2.16.1. Eight (8) one-piece aluminum slotted shelving uprights, set at 36" centers (only). 3.2.16.1.1.Uprights shall be secured to sidewalls in a manner consistent with the anticipated stresses that will be imposed and expected lifecycle of this vehicle. 3.2.16.1.2.Uprights shall be properly installed per manufacturer's instruction for smooth operation, including but not limited to ensuring centerlines are accurate (36" +/- 1/16" typical), uprights are plumb, and lateral alignment is true the entire length of each section. City of Pleasanton Outreach Vehicle Specifications(Version 1.1) Page 14 of 23