12 - Laserfiche WebLink

3.2.3. Vehicle ceiling and walls shall be insulated with 1.0" nominal thickness rigid foam board insulation or equivalent, minimum R-1 1 insulation value rated against sound, heat and cold environment. 3.2.3.1. Underbody shall be protected from road spray and elements by an additional layer of rubberized automotive undercoating. 3.2.4. Vehicle ceiling shall be sub-paneled with 3/8" environmentally conscious furniture grade plywood and overlaid with environmentally conscious ribbed acoustical fabric. The fabric shall be applied in a manner consistent with the lifetime of the vehicle. Color and texture of fabric shall be selected by the city from the vendor's"standard" offerings. 3.2.5. Vehicle walls shall be sub-paneled with 3/8" environmentally conscious furniture grade plywood and overlaid with "Velcro friendly" environmentally conscious commercial finish. Color and type of finish shall be selected by the city from the vendor's "standard" offerings. 3.2.6. Vehicle flooring shall be sub-paneled with 1/2" environmentally conscious exterior grade plywood applied over heavy-weight tar paper or equivalent moisture barrier, properly filled and prepared for floor covering. 3.2.7. Floor covering shall be single sheet commercial grade vinyl flooring. 3.2.7.1. Covering shall have a 10-year minimum wear warranty. 3.2.7.2. Sub-flooring shall be properly prepared prior to installation of the floor covering. 3.2.7.3. Flooring shall be installed in a manner consistent with the manufacturer's recommendations. 3.2.7.4. Any significant flooring remnants remaining from the installation shall be shipped loose with the completed vehicle. 3.2.7.5. The city will select the exact color and pattern of flooring from vendor's selections based on other interior color choices. 3.2.7.6. Covering shall have a static coefficient of friction of 0.6 on level surfaces. 3.2.7.7. Covering shall meet the requirements of ASTM C 501 for wear resistance. 3.2.7.8. Covering shall meet the current requirements of ASTM E 648 (USA) and ULCS 102.2 (Canada)for fire safety. 3.2.8. Floor covering in the driver/passenger area shall be carpeted with insulated padding beneath to help with sound attenuation. 3.2.8.1. Carpeting shall be installed on all applicable foot surfaces and on the engine cover within the cab area. 3.2.8.2. Carpeting shall be chosen by city from manufacturer's selections. 3.2.9. Two (2) flanged aircraft style L-track cargo tie-down tracks shall be recessed into the interior floor per the preliminary drawing(s). City of Pleasanton Outreach Vehicle Specifications(Version 1.1) Page 12 of 23