RES 221299 - Laserfiche WebLink

City of Pleasanton Exhibit D: Cart Specifications Franchise Agreement with Pleasanton Garbage Service City of Pleasanton Page D-2 June 7, 2022 • Enables the free and complete flow of material from the Cart during the dump cycle without interference with the material already deposited in the truck body or the truck body itself and its lifting mechanism; • Permits users of the Cart to conveniently and easily open and shut the lid throughout the serviceable life of the Cart; • The lid handle shall be an integrally molded part of the lid; • The lid (and body) must be of such design and weight that would prevent an empty Cart from tilting backward when flipping the lid open; and, • The lid shall be hinged to the Cart body in such a manner so as to enable the lid to be fully opened, free of tension, to a position whereby it may rest against the backside of the Cart body. E. Cart Colors The Solid Waste, Recyclable Materials, and Organic Materials Carts shall be differentiated by color. The colors shall be colorfast and resistant to fading as a result of weathering or ultraviolet degradation. Color of lids and Cart bodies must be uniform for each Cart type (i.e., Solid Waste, Recyclable Materials, and Organic Materials) as specified in Section 5.16.7. For all colors including those prescribed in this paragraph and Section 5.16.7, the Contractor shall obtain written approval from the City for the Cart colors before Contractor’s purchase of the Carts. Notwithstanding this Section, the Contractor is not required to replace functional Containers, including Containers purchased prior to January 1, 2022, that do not comply with the color requirements of Section 15.6.7.B prior to the end of the useful life of those Containers, or prior to January 1, 2036, whichever comes first. F. Identification Markings All markings on the Carts shall be approved by the City in advance of ordering Carts. An arrow, of at least three (3) inches by five (5) inches, hot stamped in white color shall be placed on the lid, indicating the direction of Cart placement. In character size of no less than 3/16 inches, the phrase: PLACE CART WITH ARROW FACING STREET FOR COLLECTION COLOQUE EL RECIPIENTE CON LAS FLECHAS HACIA LA CALLE Additionally, the SOLID WASTE, RECYCABLES or ORGANIC MATERIALS must be hot stamped in white on the front or sides of the Cart in characters no less that one (1) inch. Contractor shall label all new or replacement Carts in accordance with the Container labeling requirements and timeline specified in Section 5.16.7 of this Agreement.