ORD 1905 - Laserfiche WebLink

71. 72. 73. 74. 75. 76. 77. The project developer shall install street frontage improvements along Fair Street per Chapter 19.40.010 of the Pleasanton Municipal Code and to the satisfaction of the City Engineer. These improvements shall include, but are not necessarily limited to: grading, sidewall street lighting, and landscaping. The portion of the existing Division Street curb cut/driveway approach fronting the subject project shall be removed and replaced with curb, gutter, and sidewalk in conformance with City standards. This change shall be shown on the plans submitted for issuance of building permits and shall be subject to the review and approval by the City Engineer prior to issuance of building permits for the project. The project developer shall deposit a bond with the City of Pleasanton to ensure completion of any required public improvements. This bond shall be in a standard form approved by the City Attorney and shall be in an amount satisfactory to the City Engineer. The project developer shall submit a final grading and drainage plan prepared by a licensed civil engineer depicting all final grades, pad and finished floor elevations, and on-site drainage control measures. This plan shall be subject to the review and approval of the City Engineer, Planning Director, and Chief Building Official prior to the issuance of any building permits. The existing grades along the northern and western property lines of the project either shall be maintained or shall be revised to match the existing grades on the adjoining properties. Said modifications shall be shown on the plans submitted for issuance of building permits and shall be subject to the review and approval by the City Engineer, Planning Director, and Chief Building Official prior to issuance of building permits for the project. The roof leader downspout bubblers shall be set back approximately 5 fi. from the back of the new Fair Street sidewalk. Said modification shall be shown on the grading and drainage plans submitted for issuance of building permits and shall be subject to the review and approval by the City Engineer and Planning Director prior to issuance of building permits for the project. The project developer shall include erosion control/storm water quality measures on the final grading plan which shall specifically address measures to prevent soil, dirt, and debris from entering the storm drain system. Such measures may include, but are not limited to, hydroseeding, hay bales, sandbags, and siltation fences and are subject to the review and approval of the City Engineer/Chief Building Official. All cut and fill slopes shall be revegetated and stabilized as soon as possible after completion of grading, in no PUD-28 Conditions of Approval Page 12