PC-2003-10 - Laserfiche WebLink

23. All trash and refuse shall be contained completely within a trash enclosure designed to be architecturally compatible with the main structure. The materials, colors, and design de- tailing of the trash enclosure walls shall match the building walls and the gates shall be constructed of corrugated metal or solid wood. The location and design of the enclosures shall be shown on the plans submitted for issuance of building permits, and shall be sub- ject to the approval of the Planning Director and Fire Chief. Trash containers shall be stored within the enclosure at all times, except when being unloaded. 24. The location of any pad-mounted transformers shall be subject to approval by the Plan- ning Director prior to issuance of permits by the Building and Safety Division. Such transformers shall be screened by landscaping or contained within an enclosure matching the building and with corrugated metal gates. All transformers shall be shown on the plans submitted for issuance of building permits. 25. All parking spaces shall be striped. Wheel stops shall be provided unless the spaces are fronted by concrete curbs, in which case sufficient areas shall be provided beyond the ends of all parking spaces to accommodate the overhang of automobiles. 26. The approved building materials and colors shall be stated on the plans submitted for is- suance of building permits to the satisfaction of the Planning director. 27. All backflow prevention devices installed with the development shall be painted forest green (Pantone Color System Number 2030) and shall be screened from view from pub- lic/ private streets. Screens shall consist of berms, walls, or landscaping satisfactorily in- tegrated into the landscape plan. Landscape screens shall include shrubbery designed by species and planting density to establish a complete screen within one year from the date of planting. Weather protection devices such as measures to protect pipes from freezing shall require approval by the Planning Director prior to use; at no time shall fabric or other material not designed and/or intended for this purpose be wrapped around or other- wise placed on these devices. All backflow prevention devices shall be shown on the plans submitted for issuance of building permits together with screening mechanism and/ or weather protection devices. Proposed screening and weather protection devices shall be reviewed for conformity to these requirements and approved by the Planning Director prior to issuance of a building permit. Landscaping and Irrigation System Design and Operation: 28. A final landscape plan and irrigation plan for the entire site shall be submitted to and ap- proved by Planning Director as part of the building permit plan set prior to issuance of an on-site permit. Said landscape plan shall be consistent with the approved landscape plan plus any conditions of approval, and shall be detailed in terms of species, location, size, quantities, and spacing. PUD-01-1D, Conditions ofApprova! March 12, 2003 per Planning Commission Page 4 of I2