Laserfiche WebLink
Chapter 1 is deleted and replaced by Chapter 20.04, the Pleasanton Building Administrative <br />Code. <br />20.55.030 ISPSC Section 302 Electrical, Plumbing, Mechanical and Fuel Gas <br />Requirements amended. <br />Section 302 is amended to read as follows: <br />302.1 Electrical. Electrical requirements for aquatic facilities shall be in accordance with the <br />California Electrical Code. <br />_Exception: Internal wiring for portable residential spas and portable residential exercise <br />spas. <br />302.2 Water Service and drainage. Piping and fittings used for water service, makeup and <br />drainage piping for pools and spas shall comply with the California Plumbing Code. Fittings shall <br />be approved for installation with the piping installed. <br />302.3 Pipe, fittings and components. Pipe, fittings and components shall be listed and labeled <br />in accordance with NSF 50 or NSF 14. Plastic lets, fittings and outlets used in public spas shall <br />be listed and labeled in accordance with NSF 50. <br />Exceptions: <br />1. Portable residential spas and portable residential exercise spas listed and labeled in <br />accordance with UL 1563 or CSA22.2 No 218.1. <br />2. Onground storage pools supplied by the pool manufacturer as a kit that includes all pipe <br />fittings and components. <br />302.4 Concealed piping inspection. Piping, including process piping that is installed in <br />trenches, shall be inspected prior to backfilling. <br />302.5 Backflow protection. Water supplies for pools and spas shall be protected against <br />backflow in accordance with the California Plumbing Code. <br />302.6 Wastewater discharge. Where wastewater from pools or spas such as backwash water <br />from filters and water from deck drains discharge to a building drainage system the connection <br />shall be through an airgap in accordance with the California Plumbing Code <br />Page 46 of 52 <br />