07 - Laserfiche WebLink

903.3.1.3 NFPA 13D sprinkler systems. Automatic sprinkler systems installed in one- and two- family dwellings; Group R-3; and townhouses shall be permitted to be installed throughout in accordance with NFPA 13D, as amended in Chapter 80. In addition, the fire -sprinkler system shall be designed and sprinklers shall be installed in the following additional locations: 1. Attic shall be provided intermediate temperature -rated residential fire sprinklers for detection coverage and located at a spacing equivalent to 30 feet by 30 feet centers and maximum of 15 feet from outside walls. 2. Fire sprinklers shall be provided in garages. Fire sprinklers shall be intermediate rated, quick response, with a maximum coverage of 130 square feet per sprinkler. 20.24.190 CFC Section 5001.5.3 added —Hazardous Materials Management Plan and Hazardous Materials Management Plan Maintenance Section 5001.5.3 is added as follows: 5001.5.3 Hazardous Materials Management Plan and Hazardous Materials Management Plan Maintenance. Hazardous Materials Management Plans (HMISs) and Hazardous Materials Management Plans (HMMPs) shall be modified and resubmitted when substantive changes occur and defined in the California Health and Safety Cope for Hazardous Materials Business Plans. Whether or not substantive changes have occurred, Hazardous Materials Management Plans (HMISs) and Hazardous Materials Management Plans (HMMPs) shall be resubmitted no later than 12 months from the last submittal date. Exception: HMISs and HMMPs for unstaffed utility sites that are under the reporting threshold for the federal Emergency Planning and Community Right -to -Know Act (EPCRA) shall be resubmitted no later than 36 months after the latest submittal. 20.24.200 CFC Section 5003.2.10 added —Biodiesel and methanol equipment. Section 5003.2.10 is added to read 5003.2.10 Biodiesel and methanol equipment. Biodiesel and methanol manufacturing/processing equipment shall be listed or approved. Such equipment shall at a minimum adequately address electrical system, materials of construction, ventilation, seismic and process control and shut -down safety issues. 20.24.210 CFC Section 5003.5.2 added —Ventilation ducting. Section 5003.5.2 is added to read: 5003.5.2 Ventilation ducting. Product conveying ducts for venting hazardous materials operations shall be labeled with the hazard class of the material being vented and the direction of flow. 20.24.220 CFC Section 5003.5.3 added — H Occupancies. Section 5003.5.3 is added to read: 5003.5.3 H Occupancies. In "H" occupancies, all piping and tubing may be required to be identified when there is any possibility of confusion with hazardous materials transport tubing or piping. Flow direction indicators are required. Page 31 of 52