11 - Laserfiche WebLink

Section AJ301.2 is amended to be read as follows: AJ301.2 Water closets. Where any water closet is replaced with a newly manufactured water closet, the replacement water closet shall comply with the requirements of the California Plumbing Code Section 411.0. 20.10.110 CRC Appendix J Section AJ301.3 amended — Electrical. Section AJ102.4.1 is amended to be read as follows: AJ301 Electrical. Repair or replacement of electrical wiring and equipment undergoing repair with like material shall be permitted. Exceptions: 1. Replacement of electrical receptacles shall comply with the requirements in the California Electrical Code, Title 24 Part 5. 2. Plug fuses of the Edison-base type shall be used for replacements only where there is not evidence of overfusing or tampering in accordance with the applicable requirements in the California Electrical Code, Title 24 Part 5. 3. For replacement of nongrounding-type receptacles with grounding-type receptacle and for branch circuits that do not have an equipment grounding conductor in the branch circuitry, the grounding conductor of a grounding- type receptacle outlet shall be permitted to be grounded to any accessible point on the grounding electrode system, or to any accessible point on the grounding electrode conductor, as allowed and described in the California Electrical Code, Title 24 Part 5. 20.10.120 CRC Appendix J Section AJ401.4 amended — Structural. Section AJ401.4 is amended to be read as follows: AJ401.4 Structural. Unreinforced masonry buildings shall have parapet bracing and wall anchors of an approved design. 20.10.130 CRC Appendix J Section AJ501.5.1 amended — Electrical equipment and wiring. Section AJ501.5.1 is amended to be read as follows: AJ501.5.1 Materials and methods. Newly installed electrical equipment and wiring relating to work done in any work area shall comply with the materials and methods requirements of the California Electrical Code, Title 24 Part 5. Exception: Electrical equipment and wiring in newly installed partitions and ceilings shall comply with the applicable requirements of the California Electrical Code, Title 24 Part 5.