01 - Laserfiche WebLink

EXHIBIT A • Acid Stability pH of 3 - 7 • Hardness 4.2 - 4.5 Mohs • Swelling Index Nil B. The in-fill material shall be installed allowing an exposed fiber or 15mm after brushing. C. This contractor is responsible for the supply and installation of all in-fill materials and shall be required to return to the site after not less than 30 days to inspect and add in-fill materials as needed. D. No in-fill materials shall be installed until the turf system is fully installed with all lines and markings. E. The synthetic turf shall be thoroughly brushed prior to any in-fill materials to remove any wrinkles and defibrillated the slit film. F. The synthetic turf shall be brushed a minimum of 10 passes over each area prior to any in-fill areas. G. The in-fill materials shall be installed in layers not to exceed 0.375 pound per square foot per layer. H. The turf shall remain free draining at all times before, during and after the in-fill materials are installed. 3.08 GENERAL CLEANUP A. The site shall be kept clean and free of debris throughout the installation. Empty barrels, sacks, bags and remnant materials shall be stored or disposed daily in a proper container or legal manner. B. After completion of the entire project, the site shall have a general cleanup removing all debris remaining on the site that is not a part of the final project. B. The cost of each unit supplied to each project shall be a part of the total proposal cost and become the sole expense of the Synthetic Turf Contractor.