01 - Laserfiche WebLink

EXHIBIT A D. All material shall be constructed using the C-8 resin technology. Pile Yarn Type Slit Film100% Polyethylene Fiber with /18% nylon monofilament fiber thatch layer. Yarn Denier ASTM D-1577 Yarn Breaking Strength ASTM D-2256 Yarn Melting Point ASTM D-789 Pile Height ASTM D-418 Pile Weight ASTM D-418 Total Weight ASTM D-418 Backing Perforations ASTM D-418 Tuft Bind (Without in-fill) ASTM D-1335 Tuft Bind (With in-fill) ASTM D-1335 Grab Tear Strength ASTM D-1682 Impact Attenuation ASTM D-355 Pill Burn Test ASTM D-2859 E. Maintenance and Operating Data: Submit to the City a copy of maintenance and operating data for the synthetic grass system. Provide descriptions of all equipment recommended for the maintenance, repair, citing turf and activities not recommended relative to the warranty. Include maintenance recommendations including coverings for special events, small repair procedures, minor seam repair, discussion of the precautions to be practiced, general maintenance and uses to avoid to protect the turf system. F. Site Acceptance: Upon completion of base inspection, the Contractor shall submit a letter confirming the site inspection has been performed, noting any discrepancies, problems and/or conflicts. A summary of certification of the acceptance of the base and drainage shall be submitted. 1.04 STANDARD SPECIFICATIONS FOR LAYOUT AND RULES A. All markings shall be performed using selected colors of turf materials. 1.05 FIELD SLOPE A. Each field shall be installed with a SLOPED surface. The slope of the field may not exceed a finish profile of 0.75% grade for the Base Bid. This will be maintained throughout. Any modification to this slope shall be submitted in advance to the City for final review and approval. 1.06 DELIVERY, STORAGE AND HANDLING Packing and Shipping: Deliver products in original unopened packaging with legible manufacturers' identification. All materials shall be stored in a dry place out of the direct sunlight.