02 - Laserfiche WebLink

107. The project developer shall be responsible for the installation of the lighting system serving the development. The lights shall be LED units. The lighting system design shall conform to the Illuminating Engineering Society (IES). Approval for the number, location, and type of electroliers shall be subject to the review and approval of the City Engineer. 108. All retaining walls and monument signs along the street shall be placed behind the Public Service Easement(PSE), unless otherwise approved by the City Engineer. 109. A water meter shall be provided to each lot of record within the development unless otherwise approved by the City Engineer. 110. A sanitary sewer lateral with two-way cleanout (located at the back of the sidewalk or curb, whichever is applicable) shall be provided to each lot of record within the development unless otherwise approved by the City Engineer. 111. The in-lieu park dedication fees shall be paid to the City prior to approval of the final subdivision map, at the rate then in effect, for the total number of buildable lots, unless this requirement has been otherwise satisfied. 112. The project developer's title company shall record the final map, CC&R's, Storm Water Operations and Maintenance Agreement, any grant deeds or easements, and any other required documents concurrently with the Alameda County Recorder's Office. After the recording of these documents the City shall be provided with a legible recorded copy. STANDARD CONDITIONS OF APPROVAL Fire 113. The Fire Chief and the City Engineer shall approve the number, type, and location of all public fire hydrants. 114. All curbs located with a seven-foot, six-inch radius of a public/private fire hydrant shall be painted red, unless, modified by the Fire Chief. Blue street "hydrant markers" shall be installed for all fire hydrants per City of Pleasanton Standard Specifications. 115. The project developer shall keep the site free of fire hazards from the start of lumber construction until the final inspection. 116. Prior to any construction framing, the project developer shall provide adequate fire protection facilities, including, but not limited to a water supply and water flow in conformance to the City's Fire Department Standards able to suppress a major fire. 117. All fire sprinkler system water flow and control valves shall be complete and serviceable prior to final inspection. Prior to the occupancy of a building having a fire alarm system, the Fire Department shall test and witness the operation of the fire alarm system. 118. The Fire Prevention Bureau reviews building/civil drawings for conceptual on-site fire mains and fire hydrant locations only. Plan check comments and approvals DO NOT INCLUDE: • Installation of the on-site fire mains and fire hydrants. Specific installation drawings submitted by the licensed underground fire protection contractor shall be submitted to the Fire Prevention Bureau for approval. • Backflow prevention or connections to the public water mains. 119. The following items will be provided prior to any construction above the foundation or slab. NOTE: Periodic inspections will be made for compliance. Page 18