03 - Laserfiche WebLink

c. Engineer the roof trusses to handle an additional load as determined by a structural engineer to accommodate the additional weight of a prototypical photovoltaic system beyond that anticipated for roofing. d. Plumbing shall be installed for solar-water heating; and e. Space shall be provided for solar-heating tank. These measures shall be shown on the building permit plan set submitted to the Director of Community Development for review and approval before issuance of the building permit. 20. Appliances meeting Energy Star standards shall be installed as part of the project. The proposed appliances shall be indicated on the plans submitted for the issuance of a building permit. 21.Water conservation device such as low-flow faucets, toilets, shower fixtures, etc. shall be installed as part of the project. The devices(s) shall be indicated on the plans submitted for the issuance of a building permit. 22.The project developer shall prepare a voluntary program of alternative transportation measures including, but not limited to, rideshare matching and subsides/rewards, preferential parking, and carpooling/vanpooling, the means by which these measures will be marketed to the employees, and the provisions of reports to the City of Pleasanton of the performance of the trip reduction program. 23.Energy efficient lighting shall be installed as part of the project. The energy efficient light shall be shown on the plans submitted for the issuance of a building permit. 24.The project developer shall effectively screen from view all ducts, meters, air conditioning equipment, and any other mechanical equipment, whether on the structure, on the ground, or on the roof, with materials architecturally compatible with the building. Screening details shall be shown on the plans submitted for issuance of building permits, the adequacy of which shall be determined by the Director of Community Development. All required screening shall be provided prior to occupancy. 25.AII trash and refuse shall be contained completely within the approved trash enclosure. The trash enclosure shall be sized to accommodate both trash and recycling containers. The materials and color of the enclosure shall match the building and the gates shall be corrugated metal or solid wood. The design of the enclosure shall be shown on the plans submitted for issuance of building permits and shall be subject to the approval of the Director of Community Department and Fire Chief. Trash containers shall be stored within the enclosure at all times, except when being unloaded. 26.The location of any pad-mounted transformers shall be subject to approval by the Director of Community Development prior to issuance of permits by the Building and Page 4 of 21